
The AirTAC MBL Aluminum Alloy Mini Cylinder MBL40X50-CAT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø40mm bore and 50mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
The AirTAC MBL40X50-CAT is a double-acting aluminum mini round cylinder engineered for tight machine spaces where a larger profile body will not fit. It delivers a robust 628 N push force at 0.5 MPa, making it well-suited for medium-duty clamping and indexing tasks within a 50 mm stroke. The riveted rolling-packed barrel crimps the front and rear covers directly to the tube, yielding a lightweight, compact body that is not designed to be disassembled or rebuilt like a traditional tie-rod cylinder.
This specific SKU features a CA pivot back cover, allowing the cylinder body to swing freely on a pin to accommodate arcing or angular loads. Because this configuration omits the -S suffix, it lacks a built-in magnet and cannot be fitted with CMSG, DMSG, or EMSG position sensor switches. The Ø16 mm carbon-steel piston rod features 20 um hard-chrome plating for wear resistance, while the internal heterogeneous two-way piston seal actively retains grease for extended operational life. End-of-stroke impact is absorbed by a fixed rubber bumper rather than an adjustable cushion. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac MBL Aluminum Alloy Mini Cylinder MBL40X50-CAT |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø40 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 40 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Uses the CA pivot back cover to articulate a swing arm on a CNC tube bender, delivering 628 N of push force at 0.5 MPa to clear the workpiece between cycles.
Pivots a diverter gate on a packaging line conveyor, using the 50 mm stroke to route small cartons into secondary chutes where a larger ISO cylinder would waste space.
Secures printed circuit board panels inside an automated router fixture, applying 528 N of pull force at 0.5 MPa to hold the panel flat against the vacuum bed.
For applications needing less force, the 32 mm bore provides 402 N push at 0.5 MPa; if your fixture requires more power, stepping up to the 50 mm bore yields 981 N. The CA clevis mount is the correct choice for mechanisms requiring pivot articulation, but if your load demands rigid fixed mounting, select the U flat-end back cover variant instead. Because the base MBL uses a fixed rubber bumper, choose the MBLC variant if your cycle speed requires adjustable air cushioning.
This cylinder does not hold its load when air pressure is lost or the valve is centred, as the rod will drift or drop without live pressure. For safety against falling loads, incorporate an external rod lock or a pilot-operated check valve. At a 50 mm stroke, the Ø16 mm rod is well-supported and side-load bending is minimal, but always ensure the pivot pin is aligned to prevent side-loading the internal rod bearing.
Quick checklist
This 40 mm bore cylinder provides 628 N push and 528 N pull force at 0.5 MPa. At 0.7 MPa, the push force is 880 N, with a maximum theoretical force of 128 kgf at 1.0 MPa. It uses a G1/4 port, a Ø16 mm rod, and operates at speeds of 30-800 mm/s.
No. This specific SKU lacks the -S suffix, meaning it has no internal magnet and cannot accept CMSG, DMSG, or EMSG sensor switches. Additionally, the base MBL relies on a fixed rubber bumper to soften end-of-stroke impact; you must upgrade to the MBLC variant to get adjustable air cushioning.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.