verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart1 Request a QuoteQuote
AirTAC MBL Series · Aluminum-Barrel Mini Cylinder

Airtac MBL Aluminum Alloy Mini Cylinder MBL40X500-CAT

The AirTAC MBL Aluminum Alloy Mini Cylinder MBL40X500-CAT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø40mm bore and 500mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.

  • BoreØ40 mm
  • Stroke500 mm
  • Port size1/8"
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionRubber bumper (MBLC variant: adjustable air cushion)
$73.54 $81.04Save 9% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every MBL40 stroke, mounting and version on one page All MBL40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac MBL Aluminum Alloy Mini Cylinder MBL40X500-CAT

The AirTAC MBL40X500-CAT is a double-acting aluminum mini round cylinder engineered for compact spaces. At 0.5 MPa it provides 628 N of push force and 528 N of pull force, driving a 500 mm stroke through a Ø16 mm carbon-steel rod with 20 µm hard-chrome plating. The CA pivot back cover allows the body to swing on a pin, making it ideal for arcing or angular load applications.

Unlike tie-rod bodies, this cylinder uses a riveted rolling-packed barrel where the covers are crimped to the tube, keeping weight low but preventing field disassembly. It relies on a fixed rubber bumper to soften end-of-stroke impacts rather than an adjustable air cushion. Note that because this specific SKU lacks the -S suffix, it cannot accept a CMSG, DMSG, or EMSG position sensor. This version has NPT ports (the T in the order code) for North American pipe fittings.

Airtac MBL Aluminum Alloy Mini Cylinder MBL40X500-CAT Technical Specifications

ModelAirtac MBL Aluminum Alloy Mini Cylinder MBL40X500-CAT
SeriesMBL aluminum-barrel mini round cylinder
Bore sizeØ40 mm
Stroke500 mm
Acting typeDouble acting
Port size1/8"
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionRubber bumper (MBLC variant: adjustable air cushion)
Max strokeUp to 500 mm

Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa628 N528 N
0.7 MPa880 N—
Max (@1.0 MPa)128 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac MBL Aluminum Alloy Mini Cylinder MBL40X500-CAT

MBLAluminum-barrel mini round cylinder, double acting.
40Bore size in mm.
×500Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).

Where the Airtac MBL Aluminum Alloy Mini Cylinder MBL40X500-CAT Is Used

precision_manufacturing

Textile Loom Let-Off

Swings via the CA pivot to maintain tension on a fabric let-off mechanism, applying up to 628 N of push force across the 500 mm stroke without binding.

conveyor_belt

Package Diverter Arm

Actuates a long diverter arm on a packaging line, using the 500 mm stroke to route boxes while the pivot back cover absorbs angular side loads.

inventory_2

Pallet Stack Pusher

Pushes lightweight pallets into a stacking zone, where the compact riveted aluminum body fits into tight conveyor framework and the fixed bumper absorbs the stop impact.

Is the Airtac MBL Aluminum Alloy Mini Cylinder MBL40X500-CAT the Right Cylinder?

This 40 mm bore hits a 628 N push force at 0.5 MPa. If your application requires less force, step down to the 32 mm bore (402 N push); if you need more power, step up to the 50 mm bore (981 N push). For faster or heavier 500 mm moves requiring end-deceleration, select the MBLC variant for its adjustable air cushion. If you need single-acting push or pull action, look at the MSBL or MTBL models (available in 40 mm bore).

Because this SKU features a 500 mm stroke, the small 16 mm rod is highly susceptible to bending under side loads—always use an external guide or leverage the included CA pivot bracket to prevent rod-bearing damage. The fixed rubber bumper softens impact but does not lock the rod; this cylinder will drift and drop if air pressure is lost, so fit an external pilot-operated check valve if you must hold a load safely. Replacement match: 40 mm bore, 500 mm stroke, G1/4 port, NPT thread, CA back cover, no magnet.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB / FA / SDB) and back cover (CA pivot / U flat-end).
  • check Installation by qualified personnel per AirTAC docs.

Airtac MBL Aluminum Alloy Mini Cylinder MBL40X500-CAT FAQ

This 40 mm bore cylinder delivers 628 N push and 528 N pull at 0.5 MPa, 880 N push at 0.7 MPa, and a maximum theoretical force of 128 kgf at 1.0 MPa. The 500 mm stroke is the maximum standard stroke available for this bore size; longer travels up to 800 mm require a non-standard made-to-order configuration.

No. Because this SKU lacks the -S magnet suffix, it cannot accept CMSG, DMSG, or EMSG sensor switches. Additionally, the base MBL uses a fixed rubber bumper for end-of-stroke damping, not an adjustable cushion screw; if you need adjustable air cushioning, you must choose the MBLC variant.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC MBL Cylinders

Request a Quote for Airtac MBL Aluminum Alloy Mini Cylinder MBL40X500-CAT

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for MBL40X500-CAT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.