
The AirTAC MBL Aluminum Alloy Mini Cylinder MBL40X500SCAT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø40mm bore and 500mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
The AirTAC MBL40X500SCAT is a double-acting aluminum mini round cylinder engineered for tight machine spaces where a larger profile body will not fit. It delivers a robust 628 N push and 528 N pull force at 0.5 MPa, making this 40 mm bore variant ideal for moving heavier actuators over its full 500 mm stroke. The riveted rolling-packed barrel crimps the front and rear covers directly to the tube, yielding a lightweight, compact body that is not designed to be disassembled like a traditional tie-rod cylinder.
This specific SKU includes a built-in magnet (-S) for compatibility with AirTAC CMSG reed and DMSG or EMSG solid-state sensor switches to confirm end-of-stroke position. The CA pivot back cover allows the cylinder to swing on a pin, accommodating arcing or angular loads, while the carbon-steel piston rod features 20 um hard-chrome plating for high wear resistance. A heterogeneous two-way piston seal permanently retains grease for long service life. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac MBL Aluminum Alloy Mini Cylinder MBL40X500SCAT |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø40 mm |
| Stroke | 500 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 40 | Bore size in mm. |
| ×500 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Drives a 500 mm weft guide mechanism in compact weaving looms, utilizing the CA pivot to accommodate the arcing travel path without binding the 16 mm rod.
Indexes pallets along a narrow conveyor line, where the 628 N push force at 0.5 MPa easily shifts loads within the 500 mm stroke range.
Lifts stacked components between machine tiers, using the -S magnet with a DMSG electronic switch to verify the upper position.
To size this actuator both ways, stepping down to the 32 mm bore yields 402 N push at 0.5 MPa for lighter duties, while stepping up to the 50 mm bore provides 981 N for heavier mechanisms. Because this is a 500 mm stroke on a mini rod, the 16 mm piston rod has low side-load tolerance; an external guide or the CA pivot back cover is mandatory to prevent rod-bearing bending under lateral stress. For dual-side anti-rotation support, consider the MBLD double-rod type.
The base MBL uses a fixed rubber bumper to soften end-of-stroke impact; if your 500 mm move requires adjustable air cushioning for heavier masses, step up to the MBLC variant. Remember that a plain MBL does not hold its load when air pressure is lost or the valve is centered, as the rod will drift; use an external pilot-operated check valve for position holding. This SKU features a G1/4 port, NPT thread form, M12x1.25 rod-end thread, and a CA pivot cover.
Quick checklist
This 40 mm bore cylinder provides 628 N push and 528 N pull at 0.5 MPa, 880 N push at 0.7 MPa, and a maximum theoretical force of 128 kgf at 1.0 MPa. The 500 mm stroke is a non-standard made-to-order length (standard max is 500 mm).
No, the base MBL uses a fixed rubber bumper to absorb end-of-stroke impact, not an adjustable cushion screw. If your application requires adjustable air cushioning for heavier moving masses, select the MBLC variant instead.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.