verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart1 Request a QuoteQuote
AirTAC MBL Series · Aluminum-Barrel Mini Cylinder

Airtac MBL Aluminum Alloy Mini Cylinder MBL40X50UT

The AirTAC MBL Aluminum Alloy Mini Cylinder MBL40X50UT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø40mm bore and 50mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.

  • BoreØ40 mm
  • Stroke50 mm
  • Port size1/8"
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionRubber bumper (MBLC variant: adjustable air cushion)
$45.05 $52.55Save 14% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every MBL40 stroke, mounting and version on one page All MBL40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac MBL Aluminum Alloy Mini Cylinder MBL40X50UT

The AirTAC MBL40X50UT is a double-acting aluminum mini round cylinder engineered for tight machine spaces. With a 40mm bore and 50mm stroke, it generates 628 N of push force and 528 N of pull force at 0.5 MPa. The U suffix denotes a rigid flat-end rear cover, providing a solid fixed mounting foot for straightforward linear actuation. Because this specific SKU lacks the -S suffix, it cannot accept a CMSG, DMSG, or EMSG position sensor switch.

Inside this compact riveted rolling-packed barrel, a heterogeneous two-way piston seal retains grease for long service life. The carbon steel piston rod features 20 um hard-chrome plating to resist wear and surface corrosion. End-of-stroke energy is absorbed by a fixed rubber bumper rather than an adjustable air cushion, making this variant ideal for predictable, moderate-speed moves rather than heavy high-impact loads. This version has NPT ports (the T in the order code) for North American pipe fittings.

Airtac MBL Aluminum Alloy Mini Cylinder MBL40X50UT Technical Specifications

ModelAirtac MBL Aluminum Alloy Mini Cylinder MBL40X50UT
SeriesMBL aluminum-barrel mini round cylinder
Bore sizeØ40 mm
Stroke50 mm
Acting typeDouble acting
Port size1/8"
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionRubber bumper (MBLC variant: adjustable air cushion)
Max strokeUp to 500 mm

Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa628 N528 N
0.7 MPa880 N—
Max (@1.0 MPa)128 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac MBL Aluminum Alloy Mini Cylinder MBL40X50UT

MBLAluminum-barrel mini round cylinder, double acting.
40Bore size in mm.
×50Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).

Where the Airtac MBL Aluminum Alloy Mini Cylinder MBL40X50UT Is Used

precision_manufacturing

PCB Router Clamping

Secures printed circuit board panels during high-speed routing operations, utilizing the 628 N push force to prevent substrate vibration.

inventory_2

Carton Flap Folding

Folds minor corrugated box flaps prior to case sealing on compact packaging lines, fitting easily into narrow conveyor side-guards.

memory

Connector Insertion

Presses IDC connectors onto ribbon cable headers in electronics assembly, applying consistent 528 N retraction force for proper seating.

Is the Airtac MBL Aluminum Alloy Mini Cylinder MBL40X50UT the Right Cylinder?

This 40mm bore provides 628 N of thrust at 0.5 MPa. If your assembly needs less force, step down to the 32mm bore which provides 402 N of push force. If you require greater power, step up to the 50mm bore which delivers 981 N at 0.5 MPa. For faster cycle times or heavier moving masses, consider the MBLC variant which replaces the fixed rubber bumper with an adjustable air cushion. If your mechanism only requires air to extend the rod, the MSBL single-acting push cylinder (available in 40mm) saves space and one air line.

Because this base MBL model operates via a fixed rubber bumper, it does not hold the load position when air pressure is lost or the valve is centered—the rod will drift. Use an external rod lock or pilot-operated check valve if gravity loads must be safely suspended. Replacement parts must match the 40mm bore, 50mm stroke, G1/4 port size, NPT thread form, and the U flat-end back cover.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB / FA / SDB) and back cover (CA pivot / U flat-end).
  • check Installation by qualified personnel per AirTAC docs.

Airtac MBL Aluminum Alloy Mini Cylinder MBL40X50UT FAQ

At 0.5 MPa this 40mm bore cylinder provides 628 N push and 528 N pull force. At 0.7 MPa the push force is 880 N, and the maximum theoretical force is 128 kgf at 1.0 MPa. It uses a Ø16 mm carbon steel rod with an M12x1.25 rod-end thread.

No. The MBL40X50UT uses a fixed rubber bumper to soften end-of-stroke impacts; it does not have an adjustable cushion screw. For adjustable air cushioning, select the MBLC variant. Additionally, this specific SKU lacks a built-in magnet, so CMSG, DMSG, or EMSG sensor switches cannot be fitted to detect rod position.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC MBL Cylinders

Request a Quote for Airtac MBL Aluminum Alloy Mini Cylinder MBL40X50UT

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for MBL40X50UT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.