
The AirTAC MBL Aluminum Alloy Mini Cylinder MBL40X75-CAT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø40mm bore and 75mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
The AirTAC MBL40X75-CAT is a compact double-acting aluminum mini round cylinder engineered for tight machine spaces. Operating at 0.5 MPa, it generates 628 N of push force and 528 N of pull force over a 75 mm stroke. The riveted rolling-packed barrel crimps the front and rear covers directly to the tube, yielding a lightweight footprint that is not designed to be disassembled like a traditional tie-rod body.
This specific SKU features a CA pivot (clevis) back cover, allowing the cylinder to swing freely on a pin to accommodate arcing or angular loads. It relies on a fixed rubber bumper to soften end-of-stroke impacts rather than an adjustable air cushion. Because this configuration lacks the -S suffix, it cannot accept a CMSG, DMSG, or EMSG position sensor switch. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac MBL Aluminum Alloy Mini Cylinder MBL40X75-CAT |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø40 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 40 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Drives the mechanical arm that folds corrugated cardboard flaps on a packaging line, using the 628 N push force and CA pivot to self-align during the arc motion.
Actuates a pivot gate to route small totes on a conveyor belt, where the 75 mm stroke provides sufficient travel and the clevis mount absorbs side loading.
Pushes lightweight aluminum brackets into a staging fixture, relying on the compact riveted aluminum body to fit within a dense palletizing cell.
Select this 40 mm bore when a 32 mm bore (providing 402 N push at 0.5 MPa) lacks the necessary power, but a 50 mm bore (delivering 981 N) would be physically too large for the envelope. The 75 mm stroke is ideal for moderate linear transfers. If your application requires faster cycling with heavier loads, consider the MBLC variant for its adjustable air cushion.
The CA clevis mount is essential for mechanisms requiring angular alignment. Keep in mind that the fixed rubber bumper only softens impact; it does not lock the rod. If the air supply is lost, the load will drift or drop, requiring an external pilot-operated check valve for position holding. Replacement requires matching the 40 mm bore, 75 mm stroke, G1/4 port, NPT thread, and CA back cover.
Quick checklist
At 0.5 MPa, this double-acting cylinder provides 628 N of push force and 528 N of pull force. At 0.7 MPa, the push force increases to 880 N, with a theoretical maximum of 128 kgf at 1.0 MPa. It uses a Ø16 mm carbon steel rod with an M12x1.25 rod-end thread.
No. Because this SKU lacks the -S suffix for a built-in magnet, you cannot mount CMSG, DMSG, or EMSG sensor switches to detect rod position. Additionally, the base MBL uses a fixed rubber bumper to absorb end-of-stroke impact; for adjustable air cushioning, you must step up to the MBLC variant.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.