
The AirTAC MBL Aluminum Alloy Mini Cylinder MBL50X125-CAT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø50mm bore and 125mm stroke, 1/4" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
The AirTAC MBL50X125-CAT is a compact double-acting aluminum mini round cylinder engineered for tight machine spaces where a larger profile body will not fit. It delivers a robust 981 N push force at 0.5 MPa and utilizes a 125 mm stroke to drive small jigs or actuators. The riveted rolling-packed barrel crimps the front and rear covers directly to the tube, keeping the body light and permanently sealed for industrial durability.
This SKU features a CA pivot back cover, allowing the cylinder to swing freely on a pin to accommodate arcing or angular loads during motion. The carbon-steel piston rod is hardened with a 20 um chrome plating to resist wear and corrosion, while the heterogeneous two-way piston seal retains grease for a long service life. Note that this specific configuration lacks a built-in magnet, meaning a CMSG, DMSG, or EMSG sensor switch cannot be fitted for rod position detection. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac MBL Aluminum Alloy Mini Cylinder MBL50X125-CAT |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø50 mm |
| Stroke | 125 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M14×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 881 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 50 | Bore size in mm. |
| ×125 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Drives a pivoting guide arm on a textile loom, using the CA clevis to swing through the 125 mm stroke while applying 981 N of push to tension the fabric web.
Folds cardboard flaps on a continuous packaging conveyor, where the compact aluminum riveted body fits between narrow side rails and delivers 881 N pull to retract the arm.
Actuates a diverter gate on a 50mm pallet conveyor, relying on the 0.15-1.0 MPa operating range and fixed rubber bumper to repeatedly knock side packages off the belt at up to 800 mm/s.
If your application requires less force, step down to the 40 mm bore, which provides 628 N push at 0.5 MPa; if you need more power, the 63 mm bore yields 1558 N push. Because this is a 125 mm stroke, side-load tolerance remains manageable, but the Ø16 mm rod still demands careful alignment—use the CA pivot to your advantage or consider the MBLD double-rod type for anti-rotation needs. To absorb heavier end-of-stroke impacts, step up to the MBLC variant for an adjustable air cushion instead of this base model's fixed rubber bumper.
This cylinder does not hold its load or position when air pressure is lost or the valve is centered; the rod will drift or drop. The rubber bumper only softens end-of-stroke impact and is not a locking mechanism. For critical position holding, install an external rod lock or a pilot-operated check valve. Replacement match: 50 mm bore, 125 mm stroke, G1/4 port size, NPT thread, CA pivot back cover, no magnet.
Quick checklist
This 50 mm bore cylinder has a G1/4 port and a Ø16 mm rod with an M14x1.5 rod-end thread. It generates 981 N push and 881 N pull at 0.5 MPa, 1374 N push at 0.7 MPa, and a maximum theoretical force of 200 kgf at 1.0 MPa.
No, this base MBL model uses a fixed rubber bumper and cannot be adjusted; you must specify the MBLC variant for adjustable air cushioning. Additionally, this SKU lacks the -S magnet suffix, so CMSG, DMSG, or EMSG sensor switches cannot be installed.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.