verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart1 Request a QuoteQuote
AirTAC MBL Series · Aluminum-Barrel Mini Cylinder

Airtac MBL Aluminum Alloy Mini Cylinder MBL50X175-CAT

The AirTAC MBL Aluminum Alloy Mini Cylinder MBL50X175-CAT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø50mm bore and 175mm stroke, 1/4" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.

  • BoreØ50 mm
  • Stroke175 mm
  • Port size1/4"
  • Acting typeDouble acting
  • Rod threadM14×1.5
  • CushionRubber bumper (MBLC variant: adjustable air cushion)
$76.89 $84.39Save 8% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every MBL50 stroke, mounting and version on one page All MBL50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac MBL Aluminum Alloy Mini Cylinder MBL50X175-CAT

The AirTAC MBL50X175-CAT is a compact double-acting aluminum mini round cylinder engineered for tight machine spaces. Delivering a robust 981 N push force at 0.5 MPa over a 175 mm stroke, it provides substantial thrust without the bulk of an ISO 15552 profile body. The riveted rolling-packed barrel crimps the front and rear covers directly to the tube, yielding a light, sealed assembly that is not designed to be disassembled like a standard tie-rod cylinder.

This specific SKU features a CA pivot (clevis) back cover, allowing the cylinder to swing on a pin to accommodate arcing or angular loads. The carbon-steel piston rod features 20 um hard-chrome plating for wear and corrosion resistance, paired with a heterogeneous two-way piston seal that retains grease for a long service life. Note that this variant lacks a built-in magnet (-S), meaning it cannot support CMSG, DMSG, or EMSG position sensors. This version has NPT ports (the T in the order code) for North American pipe fittings.

Airtac MBL Aluminum Alloy Mini Cylinder MBL50X175-CAT Technical Specifications

ModelAirtac MBL Aluminum Alloy Mini Cylinder MBL50X175-CAT
SeriesMBL aluminum-barrel mini round cylinder
Bore sizeØ50 mm
Stroke175 mm
Acting typeDouble acting
Port size1/4"
Rod threadM14×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionRubber bumper (MBLC variant: adjustable air cushion)
Max strokeUp to 500 mm

Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa982 N881 N
0.7 MPa1374 N—
Max (@1.0 MPa)200 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac MBL Aluminum Alloy Mini Cylinder MBL50X175-CAT

MBLAluminum-barrel mini round cylinder, double acting.
50Bore size in mm.
×175Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).

Where the Airtac MBL Aluminum Alloy Mini Cylinder MBL50X175-CAT Is Used

conveyor_belt

Package Divert Arm

Drives a swinging diverter gate on a packaging conveyor, using the CA clevis to accommodate the arc of the arm while providing 981 N to push heavy cartons.

precision_manufacturing

Press Ejection Lever

Actuates an angled ejection lever inside a compact stamping press, where the 175 mm stroke clears finished parts and the pivot mount tolerates lateral deviation.

inventory_2

Pallet Lift Gate

Raises and lowers a hinged pallet routing gate, relying on the 50 mm bore's 881 N pull force to retract the barrier against gravity in a tight footprint.

Is the Airtac MBL Aluminum Alloy Mini Cylinder MBL50X175-CAT the Right Cylinder?

Select this 50 mm bore when an application requires 981 N of push force at 0.5 MPa but lacks space for a larger profile cylinder. If your load is lighter, stepping down to the 40 mm bore drops the output to 628 N, saving space; if you need more power, the 63 mm bore raises the push force to 1558 N. The base MBL uses a fixed rubber bumper to soften end-of-stroke impacts—if you need adjustable air cushioning to slow heavier loads, step up to the MBLC variant.

Because this model has a CA pivot back cover, it is ideal for mechanisms requiring angular movement. Keep in mind the plain MBL does not hold its position if air pressure drops or the valve is centred—the rod will drift. An external rod lock or pilot-operated check valve is required for fail-safe load holding. Replacement matching requires a 50 mm bore, 175 mm stroke, G1/4 port, NPT thread, and a CA back cover.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB / FA / SDB) and back cover (CA pivot / U flat-end).
  • check Installation by qualified personnel per AirTAC docs.

Airtac MBL Aluminum Alloy Mini Cylinder MBL50X175-CAT FAQ

This double-acting cylinder delivers a push force of 981 N and a pull force of 881 N at 0.5 MPa. At 0.7 MPa, the push force increases to 1374 N, with a theoretical maximum of 200 kgf at 1.0 MPa. It operates at speeds between 30-800 mm/s.

No, this specific SKU lacks the -S magnet, so CMSG, DMSG, or EMSG sensor switches cannot be fitted. It uses a fixed rubber bumper for end-of-stroke damping; for adjustable air cushioning to handle heavier loads, you need the MBLC variant.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC MBL Cylinders

Request a Quote for Airtac MBL Aluminum Alloy Mini Cylinder MBL50X175-CAT

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for MBL50X175-CAT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.