
The AirTAC MBL Aluminum Alloy Mini Cylinder MBL50X250-CAT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø50mm bore and 250mm stroke, 1/4" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
The AirTAC MBL50X250-CAT is a double-acting aluminum mini round cylinder engineered for compact spaces. It delivers a robust 981 N push force at 0.5 MPa, making this 50 mm bore, 250 mm stroke unit ideal for driving heavier jigs or clamping assemblies where footprint matters. The riveted rolling-packed barrel permanently crimps the covers to the tube, yielding a lighter body that is not meant to be disassembled like a tie-rod cylinder.
This specific SKU features a CA pivot (clevis) back cover, allowing the cylinder body to swing on a pin to absorb arcing and angular loads during motion. It relies on a fixed rubber bumper to soften end-of-stroke impacts rather than an adjustable cushion. The carbon-steel piston rod is hardened with a 20 µm chrome plating for wear resistance, and the heterogeneous two-way piston seal actively retains grease for extended operational life. Because this model lacks the -S suffix, it cannot accept a CMSG, DMSG, or EMSG position sensor. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac MBL Aluminum Alloy Mini Cylinder MBL50X250-CAT |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø50 mm |
| Stroke | 250 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M14×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 881 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 50 | Bore size in mm. |
| ×250 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Uses the 981 N push force and CA pivot back cover to swing a custom fixture clear of a CNC machining zone before the spindle starts a cutting cycle.
Leverages the 250 mm stroke and pivot action to push heavy pallets onto a secondary packaging line, absorbing angular load as the arm arcs.
Relies on the fixed rubber bumper to safely complete the 250 mm extension folding large corrugated carton flaps without denting the aluminum body.
If you need less force, the neighbouring 40 mm bore provides 628 N push at 0.5 MPa; if you need more, the 63 mm bore offers 1558 N. Choose the MBLC variant if your cycle speed requires an adjustable air cushion rather than this fixed rubber bumper, or the MSBL/MTBL single-acting versions if you only need spring-return push or pull. This SKU uses a G1/4 port, NPT tapered thread, Ø16 mm rod with an M14x1.5 end, and a CA pivot back cover.
Because this unit lacks a -S magnet, it cannot support position sensing. Note that a plain MBL will not hold a load if air pressure drops—the rod drifts, so add an external rod lock or pilot-operated check valve if position retention is critical. At 250 mm stroke, the Ø16 mm rod has low side-load tolerance; use the CA clevis with an SDB bracket, an external guide, or the MBLD double-rod type to prevent bending.
Quick checklist
At 0.5 MPa, this 50 mm bore cylinder pushes with 981 N and pulls with 881 N. At 0.7 MPa, the push force is 1374 N. The maximum theoretical force is 200 kgf at 1.0 MPa.
No. This base MBL model uses a fixed rubber bumper, not an adjustable air cushion (for that, choose the MBLC variant). Additionally, because this SKU lacks the -S magnet suffix, you cannot mount a CMSG, DMSG, or EMSG sensor switch to detect rod position.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.