
The AirTAC MBL Mini Cylinders MBL32X450UT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 450mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
MBL32X450UT is a compact double-acting mini round cylinder from AirTAC's aluminum-barrel MBL line: a 32 mm bore driving a 12 mm chrome-plated rod over a 450 mm stroke, made for tight machine envelopes where a full profile cylinder will not fit. At 0.5 MPa it pushes 402 N and pulls 346 N (563 N at 0.7 MPa, up to 82 kgf theoretical at 1.0 MPa) - enough for light clamping, ejecting and lifting on long-travel axes.
The barrel is riveted rolling-packed aluminum, with covers crimped onto the tube instead of tie-rods, so the body stays short and light - but it is not designed to be disassembled and rebuilt the way a tie-rod cylinder is. Inside, a heterogeneous two-way piston seal retains grease for long seal life, and the carbon-steel rod carries 20 um hard chrome for wear and corrosion resistance. This SKU has the U flat-end back cover (a rigid rear face for fixed mounting) and G1/8 ports with NPT tapered thread. It carries no -S magnet, so no CMSG / DMSG / EMSG sensor switch can be fitted to this cylinder.
| Model | Airtac MBL Mini Cylinders MBL32X450UT |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø32 mm |
| Stroke | 450 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 32 | Bore size in mm. |
| ×450 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Ejecting loaded fixture drawers from in-circuit-test racks: the 402 N push at 0.5 MPa moves a 30 kg drawer, and the riveted aluminum barrel slots into the narrow gap between racks where nothing larger fits.
Sweeping misaligned cartons off a conveyor from a compact gantry: the 450 mm stroke reaches across the belt, while the 346 N pull return resets the pusher plate quickly at up to 800 mm/s.
Locking and releasing slide-out coolant or chip trays on small CNC cells: 563 N of push at 0.7 MPa seats the latch firmly, and the U flat-end rear bolts flat against the enclosure wall.
Step down to bore 25 (245 N push at 0.5 MPa) if your load is lighter and space is even tighter, or up to bore 40 (628 N at 0.5 MPa) when you need roughly 55% more force from the same compact class. If end-of-stroke impact matters at speed, choose the MBLC variant, which adds an adjustable air cushion; the base MBL32X450UT stops on a fixed rubber bumper only. For single-acting push or pull duty in this bore, the MSBL or MTBL covers it.
A plain MBL will not hold position when air is exhausted or the valve centres - the rod drifts, and the rubber bumper is not a lock or brake - so add an external rod lock or a pilot-operated check valve if the load must stay put without live pressure. At 450 mm the slender 12 mm rod tolerates very little side load: guide the load externally, or specify a CA pivot back cover with an SDB bracket, or the MBLD double-rod type. For a like-for-like replacement, match bore 32, stroke 450, G1/8 port, NPT thread, U back cover and any mounting accessory (LB foot, FA flange, SDB pivot bracket).
Quick checklist
At 0.5 MPa the 32 mm bore gives 402 N push and 346 N pull; at 0.7 MPa push rises to 563 N. The theoretical maximum is 82 kgf at 1.0 MPa. It runs double acting at 30-800 mm/s on filtered air (40 um) over a 0.15-1.0 MPa pressure range, with a 1.5 MPa proof pressure and -20 to +70 C operation.
No. MBL32X450UT has no -S magnet, so a CMSG reed switch or a DMSG / EMSG electronic switch has nothing to detect - order the MBL32X450SU version if rod-position feedback is needed. Also note this model ends its stroke on a fixed rubber bumper; the adjustable air cushion is only available on the MBLC variant, and neither feature holds the load when air pressure is lost.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.