
The AirTAC MBLJ Adjustable Aluminum Alloy Mini Cylinder MBLJ32X400-75 is a genuine double-acting aluminum-barrel mini cylinder with a Ø32mm bore, a 400mm nominal stroke and a rear adjustable-stroke stopper — trim up to 75mm for a usable window of 325–400mm. Fixed rubber bumper.
The AirTAC MBLJ32X400-75 is a double-acting, double-rod aluminum mini cylinder featuring a rear adjustable stroke stopper. A 400 mm nominal stroke combines with a 75 mm rear trimmer to provide a usable end-position window of 325-400 mm. This allows precise fine-tuning during commissioning or product changeover without adding external physical stops.
The riveted rolling-packed aluminum barrel uses a heterogeneous two-way grease-retaining piston seal for long-term lubrication. The Ø12 mm carbon-steel piston rod features 20 µm hard-chrome plating to resist wear. Because this SKU lacks the -S suffix, it has no built-in magnet and cannot support CMSG, DMSG, or EMSG position sensors. End impact is absorbed by a fixed rubber bumper. The rear adjuster acts purely as a travel stop to set the end position; it is not a lock and will not hold the load without continuous live air pressure.
| Model | Airtac MBLJ Adjustable Aluminum Alloy Mini Cylinder MBLJ32X400-75 |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder (adjustable stroke) |
| Bore size | Ø32 mm |
| Nominal stroke | 400 mm |
| Adjustable window | 325–400 mm (trim 75 mm) |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
The rear stopper sets the end position — it is a travel stop, not a lock. Overall length = A + 2 × stroke + adjustable stroke. MBLJ/MBLCJ mounting is Basic / FA / LB only (no SDB, no back-cover code). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
MBLJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod MBL push of the same bore. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a margin.
| MBLJ | MBLJ aluminum-barrel adjustable-stroke mini cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×400 | Nominal stroke length in mm. |
| -75 | Adjustable-stroke amount (mm you can trim at the rear). |
| S | Optional built-in magnet for a CMSG/DMSG/EMSG sensor switch. |
Related: MBLCJ (adjustable stroke, adjustable cushion), MBL (fixed stroke), MBLD (double rod).
Pushes PCB handling arms across a 400 mm span. The 75 mm rear trimmer fine-tunes the handoff position to match varying panel widths during product changeover.
Actuates carton folding flaps on a long-stroke packaging line.
Shifts warp beam carriers between loom stations. The fixed rubber bumper softens the end-of-travel impact for this 32 mm bore, preventing sudden jerks on delicate yarn feeds.
The MBLJ32X400-75 is preferred over a fixed MBL cylinder when your machine needs on-the-fly end-position tweaking. If your application suffers from severe end-impact shock, consider the MBLCJ variant which adds an adjustable air cushion, whereas this MBLJ relies solely on a fixed rubber bumper.
Mounting is limited to Basic, FA (flange), or LB (foot) brackets; there is no back-cover or SDB pivot option available for this body. The standard PT port matches the G1/8 thread size for this 32 mm bore. Because the 400 mm stroke is relatively long for a mini cylinder, the small Ø12 mm rod is highly susceptible to side-load bending; an external guide rail must be used to prevent rod damage and seal failure. The overall length is extended by the 75 mm adjuster mechanism.
AirtacDistr lists every MBLJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-mblj32-adjustable-double-rod-mini-cylinder
Quick checklist
The 400 mm nominal stroke features a 75 mm rear adjuster, giving a usable end-position window of 325-400 mm.
This specific SKU lacks the -S suffix, so it has no built-in magnet and cannot fit CMSG, DMSG, or EMSG position sensors. Additionally, the rear adjuster is strictly a travel stop that sets the end position; it is not a lock and cannot hold the load without continuous live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.