verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC MICJ Series · Mini Cylinder

Airtac MICJ Adjustable Mini Cylinder MICJ40X50-10

The AirTAC MICJ Adjustable Mini Cylinder MICJ40X50-10 is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø40mm bore and 50mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.

  • BoreØ40 mm
  • Stroke50 mm
  • Port size1/4"
  • Acting typeDouble acting, double rod, adjustable stroke + cushion
  • Rod threadM12×1.25
  • CushionVariable air cushion, both ends
$80.68 $89.81Save 10% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every MICJ40 stroke, adjustment, mounting and version on one page All MICJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac MICJ Adjustable Mini Cylinder MICJ40X50-10

Dial in the forward stop on site with the MICJ40X50-10, a stainless-steel round-body mini cylinder that lets an external screw shorten the extend stroke by up to 10 mm (usable forward range 40-50 mm) while a needle-set air cushion at both ends soaks up high-speed shock. This double-acting Ø40 bore runs on a 1/4" port and a Ø16 rod with an M12x1.25 male thread, pushing 628.3 N at 0.5 MPa. The riveted stainless barrel and rod resist mild corrosion and washdown. Note this is a non-ISO-6432 size.

This SKU ships without a magnet, so it cannot take CMSG, DMSG or EMSG sensors; order a -S variant if you need position detection. The adjustable cushion only decelerates the piston near the stroke end to prevent impact, it is not a mid-stroke lock or brake. If your application must hold a load on air loss, add an external rod lock or pilot-operated check valve, as the piston will drift.

Airtac MICJ Adjustable Mini Cylinder MICJ40X50-10 Technical Specifications

ModelAirtac MICJ Adjustable Mini Cylinder MICJ40X50-10
SeriesMICJ mini cylinder
Bore sizeØ40 mm
Stroke50 mm
Acting typeDouble acting, double rod, adjustable stroke + cushion
Port size1/4"
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionVariable air cushion, both ends
Max standard strokeUp to 500 mm

Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø40 bore is a larger, non-ISO-6432 size.

Theoretical Output Force (Ø40mm)

PressureForce (both ways)
0.5 MPa528 N
0.7 MPa739 N
Max (@1.0 MPa)108 kgf

MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).

Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ40X50-10

MICJround-body mini cylinder (adjustable-stroke, variable cushion).
40Bore size in mm.
×50Stroke length in mm.
-10Adjustable stroke window (mm the extend stroke can be shortened on site).
-SOptional built-in magnet for CMSG / DMSG / EMSG sensors.

MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.

Where the Airtac MICJ Adjustable Mini Cylinder MICJ40X50-10 Is Used

conveyor_belt

Heavy Diverter Gate

Shifts a loaded diverting arm on a conveyor.

package_2

Carton Flap Folder

Folds heavy corrugated flaps at speed. The needle-set cushion prevents end-of-stroke slamming on the 50 mm stroke, and the external screw fine-tunes the fold depth for different box sizes.

precision_manufacturing

Press Fit Stop

Drives a light pressing operation.

Is the Airtac MICJ Adjustable Mini Cylinder MICJ40X50-10 the Right Cylinder?

For lighter pushes, the Ø32 bore delivers 402.2 N at 0.5 MPa, while the Ø40 is the largest round-body mini in this series with no larger option, offering 628.3 N at 0.5 MPa and a theoretical max of 128.1 kgf. Choose this model when you need high force combined with a dialed-in forward position and shock absorption at fast cycle speeds up to 800 mm/s. The external stop screw trims the extend end only; retract remains full. Mount using LB foot, FA flange or TC trunnion (the SDB pivot-block is not available on this adjustable variant), and pair with CA, U, R or CM back covers. Because this specific SKU lacks the -S magnet, it cannot support magnetic sensing.

AirtacDistr lists every MICJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-micj40-adjustable-double-rod-cushioned-mini-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT / G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Do not dismantle the riveted front/back covers.
  • check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac MICJ Adjustable Mini Cylinder MICJ40X50-10 FAQ

This Ø40 double-acting cylinder uses a 1/4" port and a Ø16 rod with an M12x1.25 thread. It pushes 628.3 N and pulls 527.8 N at 0.5 MPa, or pushes 879.6 N and pulls 738.9 N at 0.7 MPa. The theoretical maximum force is 128.1 kgf at 1.0 MPa.

An external screw shortens the extend stroke by up to 10 mm on site, while the needle-set air cushion at both ends decelerates the piston near the ends to absorb high-speed shock. This cylinder has no magnet and cannot take sensors. The cushion and stop screw do not lock or hold the load; if air is lost, the piston drifts, so use an external rod lock for holding.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC MICJ Cylinders

Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ40X50-10

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for MICJ40X50-10 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.