
The AirTAC MICJ Adjustable Mini Cylinder MICJ40X50-20 is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø40mm bore and 50mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
Dial in the forward stop on-site without swapping cylinders: the MICJ40X50-20 uses an external screw to shorten the extend stroke by up to 20 mm, giving a usable forward range of 30-50 mm while retract remains full. This double-acting round-body mini cylinder pairs that set-position flexibility with an adjustable air cushion at both ends, soaking up high-speed shock so you control both the impact and the end point.
Built with a stainless-steel barrel and Ø16 mm piston rod (M12x1.25 male thread), it resists mild corrosion and washdown. This non-ISO-6432 size runs on a 1/4" port. Note this SKU lacks a magnet, so it cannot take CMSG/DMSG/EMSG sensors.
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ40X50-20 |
|---|---|
| Series | MICJ mini cylinder |
| Bore size | Ø40 mm |
| Stroke | 50 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | 1/4" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø40 bore is a larger, non-ISO-6432 size.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 528 N |
| 0.7 MPa | 739 N |
| Max (@1.0 MPa) | 108 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| MICJ | round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 40 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -20 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Trim the 50 mm extend stroke by 20 mm to hit a precise gate position, relying on the dual air cushions to absorb the shock of fast, repetitive carton deflection.
Set the exact 30-50 mm crush depth for carton flaps while the stainless construction handles light washdown, tuning the end cushion for rapid cycling.
There is no larger MICJ bore. Choose this 40 mm model when your move needs that 32 kg vertical lift margin and a fast, settable end position. The adjustable stop plus needle cushion shines in high-speed cycles where you must trim the forward impact without changing the mounting.
For mounting, use LB foot, FA flange or TC trunnion; the SDB pivot-block is not available on this adjustable variant, and back covers include CA, U, R or CM. The stop screw sets the end position but is not a mid-stroke lock. If the load must hold on air loss, the piston will drift—add an external rod lock or pilot check valve. Add the -S variant if you need magnetic sensing.
AirtacDistr lists every MICJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-micj40-adjustable-double-rod-cushioned-mini-cylinder
Quick checklist
This double-acting Ø40 cylinder uses a 1/4" port. At 0.5 MPa it pushes 628.3 N and pulls 527.8 N. At 0.7 MPa it pushes 879.6 N and pulls 738.9 N. The theoretical maximum force is 128.1 kgf at 1.0 MPa.
An external screw shortens the extend stroke by up to 20 mm (retract stays full). Needle valves adjust the air cushion at both ends to decelerate the piston near stroke end, but this is not a mid-stroke lock or brake. The piston drifts on air loss, so use an external rod lock for holding. This SKU has no magnet and cannot take sensors; the -S variant adds one for CMSG/DMSG/EMSG switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.