
The AirTAC MICJ Adjustable Mini Cylinder MICJ40X50-30 is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø40mm bore and 50mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
Dial in the forward stop on-site without swapping hardware: the MICJ40X50-30 uses an external screw to shorten the extend end position by up to 30 mm, giving a usable forward range of 20 to 50 mm. This double-acting round-body mini cylinder pairs that settable stop with a needle-adjustable air cushion at both ends to soak up high-speed shock, running at 30-800 mm/s.
The stainless-steel barrel and Ø16 piston rod resist mild corrosion and washdown, while the 1/4" port feeds serious power. It pushes with 628.3 N and pulls with 527.8 N at 0.5 MPa. This non-ISO-6432 Ø40 build omits the magnet, so it cannot host CMSG/DMSG/EMSG sensors.
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ40X50-30 |
|---|---|
| Series | MICJ mini cylinder |
| Bore size | Ø40 mm |
| Stroke | 50 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | 1/4" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø40 bore is a larger, non-ISO-6432 size.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 528 N |
| 0.7 MPa | 739 N |
| Max (@1.0 MPa) | 108 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| MICJ | round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 40 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Shifts a loaded diverting arm precisely, using the 30 mm extend stop to set the exact deflection angle while the dual air cushions absorb the impact of fast 32 kg package routing.
Halts incoming pallets on a roller conveyor by extending a solid stop block, tuning the forward position on-site without hardware changes to match various pallet widths.
There is no larger MICJ frame, so for loads beyond 377 N safe working force, consider a twin-rod setup or external guidance. The adjustable 30 mm extend stop and dual cushions shine in fast set-position moves, but remember the piston drifts on air loss—the stop screw sets the end position, it is not a mid-stroke lock, so add a pilot check valve for held loads.
Mounting uses LB foot, FA flange or TC trunnion (SDB pivot-block is unavailable on this adjustable variant), with back covers CA/U/R/CM. Because this specific SKU lacks the -S magnet, it cannot accept position sensors; choose an -S version if you need CMSG/DMSG/EMSG switches.
AirtacDistr lists every MICJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-micj40-adjustable-double-rod-cushioned-mini-cylinder
Quick checklist
This Ø40 double-acting cylinder uses a 1/4" port and an M12x1.25 male rod thread. The theoretical maximum force is 128.1 kgf at 1.0 MPa.
An external screw shortens the extend stroke by up to 30 mm (retract remains full), while needle valves adjust the air cushions at both ends to decelerate high-speed impacts. The stop screw sets the end position but is not a mid-stroke lock; the piston will drift on air loss, so use an external rod lock for holding. This non-S SKU has no magnet and cannot take sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.