
The AirTAC MICJ Adjustable Mini Cylinder MICJ40X50-30S is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø40mm bore and 50mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
Dial in the forward stop on site without swapping cylinders: this round-body stainless-steel mini cylinder features an external screw that shortens the extend stroke by up to 30 mm, giving a usable 20-50 mm forward range.
Built with a double-acting piston, the stainless barrel and rod resist mild corrosion and washdown environments. The built-in magnet (-S) supports CMSG, DMSG and EMSG sensors for position detection.
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ40X50-30S |
|---|---|
| Series | MICJ mini cylinder |
| Bore size | Ø40 mm |
| Stroke | 50 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | 1/4" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø40 bore is a larger, non-ISO-6432 size.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 528 N |
| 0.7 MPa | 739 N |
| Max (@1.0 MPa) | 108 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| MICJ | round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 40 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Pushes heavy cartons at high speed on a packaging line, using the 30 mm extend adjustment to tune the stopping distance and the air cushion to absorb the 628 N impact.
Halts loaded pallets on a gravity conveyor, relying on the 40 mm bore force and needle-set cushions to decelerate the mass smoothly without slamming.
Presses sub-assemblies into fixtures, using the external stop screw to dial in a precise 35 mm forward position while the magnet confirms stroke completion.
The adjustable extend stop and dual air cushions are ideal for fast, settable-position moves where you must tune the impact at stroke end.
The stop screw sets the end position but is not a mid-stroke lock, and the cylinder will drift on air loss—use an external rod lock or pilot check valve for held loads. Mount via LB foot, FA flange or TC trunnion (SDB pivot-block is not available on this variant). Choose CMSG, DMSG or EMSG switches since this SKU includes the -S magnet.
AirtacDistr lists every MICJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-micj40-adjustable-double-rod-cushioned-mini-cylinder
Quick checklist
This 40 mm bore double-acting cylinder features a 1/4" port. The theoretical maximum force is 128.1 kgf at 1.0 MPa.
An external screw shortens the extend end by up to 30 mm (retract remains full stroke). The adjustable air cushion at both ends only decelerates the piston near the stroke end to absorb high-speed shock; it is not a brake. The cylinder does not hold position on air loss and will drift. The -S magnet enables CMSG, DMSG and EMSG sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.