
The AirTAC MICJ Adjustable Mini Cylinder MICJ40X50-30STC is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø40mm bore and 50mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
Dial in the forward stop without swapping cylinders: the AirTAC MICJ40X50-30STC uses an external screw to shorten the extend end position by up to 30 mm on site, giving a usable forward range of 20-50 mm. This round-body stainless steel mini cylinder pairs that settable stroke with a variable air cushion at both ends, soaking up high-speed shock before impact. It is a double-acting riveted construction with a Ø16 mm piston rod and a 1/4" port.
The stainless barrel and rod resist mild corrosion and washdown. Because this SKU includes the -S magnet, it is ready for CMSG, DMSG, or EMSG position sensing.
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ40X50-30STC |
|---|---|
| Series | MICJ mini cylinder |
| Bore size | Ø40 mm |
| Stroke | 50 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | 1/4" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø40 bore is a larger, non-ISO-6432 size.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 528 N |
| 0.7 MPa | 739 N |
| Max (@1.0 MPa) | 108 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| MICJ | round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 40 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Secure parts weighing up to 32 kg in machining fixtures, using the 30 mm extend adjustment to dial in the exact clamp position without shimming.
Route heavy cartons on a line at 800 mm/s, relying on the dual adjustable air cushions to absorb the shock and prevent end-cap banging.
When sizing, check both directions: stepping down to a Ø32 bore drops the 0.5 MPa push force to 402.2 N, while there is no larger MICJ option above Ø40. The dual air cushions shine in fast set-position moves, letting you trim the needle to decelerate the load smoothly before the end of stroke.
Mount via the included TC trunnion, or choose LB foot or FA flange brackets (the SDB pivot-block is not available on this adjustable variant). Remember that the stop screw sets the end position but is not a mid-stroke lock. If the application must hold a load on air loss, the piston will drift—add an external rod lock or pilot-operated check valve.
AirtacDistr lists every MICJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-micj40-adjustable-double-rod-cushioned-mini-cylinder
Quick checklist
This 40 mm bore cylinder has a 1/4" port and a male M12x1.25 rod thread.
An external stop screw shortens the extend stroke by up to 30 mm on site, while the retract stroke remains full. The needle-set variable air cushion at both ends decelerates the piston near the end of travel to absorb shock. The -S suffix means it has a built-in magnet for CMSG, DMSG, or EMSG sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.