
The AirTAC MICJ Adjustable Mini Cylinder MICJ40X50-40 is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø40mm bore and 50mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
Dial in the forward stop on-site without swapping parts: the MICJ40X50-40 uses an external screw to shorten the extend stroke by up to 40 mm, giving a usable forward range of 10-50 mm. As a double-acting round-body mini cylinder, it pairs this settable end position with a needle-adjustable air cushion at both ends to soak up high-speed shock. The stainless-steel barrel and Ø16 mm piston rod shrug off mild corrosion and washdown environments.
This Ø40 mm bore delivers substantial force, pushing with 628.3 N and pulling with 527.8 N at 0.5 MPa. Air connects via a 1/4" port, and the male M12x1.25 rod thread handles the load. Note this SKU lacks a magnet, so it cannot host CMSG, DMSG or EMSG sensors.
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ40X50-40 |
|---|---|
| Series | MICJ mini cylinder |
| Bore size | Ø40 mm |
| Stroke | 50 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | 1/4" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø40 bore is a larger, non-ISO-6432 size.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 528 N |
| 0.7 MPa | 739 N |
| Max (@1.0 MPa) | 108 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| MICJ | round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 40 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -40 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Dial in the exact forward position to fold thick cardboard, while the dual air cushions absorb the impact of high-speed 30-800 mm/s cycles.
Press lightweight components down using the 32 kg safe vertical lift capacity, adjusting the stop nut to prevent over-travel.
The 40 mm extend adjuster is ideal for fast set-position moves where you need to tune the forward stop without machining spacers. Mount via LB foot, FA flange or TC trunnion (the SDB pivot block is not offered on this adjustable variant).
Keep in mind the stop screw only sets the end position; it is not a mid-stroke lock. The cylinder will drift and the piston will not hold a load on air loss or when the valve is centered. The air cushion strictly decelerates the piston near the stroke ends. For a safely held load, install an external rod lock or pilot-operated check valve.
AirtacDistr lists every MICJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-micj40-adjustable-double-rod-cushioned-mini-cylinder
Quick checklist
At 0.5 MPa this Ø40 mm bore cylinder pushes with 628.3 N and pulls with 527.8 N. At 0.7 MPa the push increases to 879.6 N and the pull to 738.9 N. The theoretical maximum force is 128.1 kgf at 1.0 MPa. It uses a 1/4" air port and a male M12x1.25 rod thread.
An external screw shortens the extend end position by up to 40 mm on-site, while the retract stroke remains full. Needle valves adjust the air cushion at both ends to decelerate the piston near the ends, though this is not a mid-stroke lock. This specific SKU has no magnet, so it cannot take CMSG, DMSG or EMSG sensors; you need the -S variant for sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.