verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC MICJ Series · Mini Cylinder

Airtac MICJ Adjustable Mini Cylinder MICJ40X50-40S

The AirTAC MICJ Adjustable Mini Cylinder MICJ40X50-40S is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø40mm bore and 50mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.

  • BoreØ40 mm
  • Stroke50 mm
  • Port size1/4"
  • Acting typeDouble acting, double rod, adjustable stroke + cushion
  • Rod threadM12×1.25
  • CushionVariable air cushion, both ends
$82.86 $92.14Save 10% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every MICJ40 stroke, adjustment, mounting and version on one page All MICJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac MICJ Adjustable Mini Cylinder MICJ40X50-40S

Dial in your forward stop on-site without swapping hardware: the MICJ40X50-40S uses an external screw to shorten the extend stroke by up to 40 mm, giving a usable 10-50 mm forward range while retract remains full. Built as a stainless-steel round-body mini cylinder, it pairs this settable position with a needle-adjustable air cushion at both ends to soak up high-speed shock.

The stainless barrel and rod resist mild corrosion and washdown. Because this is an -S SKU, it includes a piston magnet for CMSG, DMSG or EMSG sensors.

Airtac MICJ Adjustable Mini Cylinder MICJ40X50-40S Technical Specifications

ModelAirtac MICJ Adjustable Mini Cylinder MICJ40X50-40S
SeriesMICJ mini cylinder
Bore sizeØ40 mm
Stroke50 mm
Acting typeDouble acting, double rod, adjustable stroke + cushion
Port size1/4"
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionVariable air cushion, both ends
Max standard strokeUp to 500 mm

Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø40 bore is a larger, non-ISO-6432 size.

Theoretical Output Force (Ø40mm)

PressureForce (both ways)
0.5 MPa528 N
0.7 MPa739 N
Max (@1.0 MPa)108 kgf

MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).

Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ40X50-40S

MICJround-body mini cylinder (adjustable-stroke, variable cushion).
40Bore size in mm.
×50Stroke length in mm.
-40Adjustable stroke window (mm the extend stroke can be shortened on site).
-SOptional built-in magnet for CMSG / DMSG / EMSG sensors.

MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.

Where the Airtac MICJ Adjustable Mini Cylinder MICJ40X50-40S Is Used

conveyor_belt

Heavy Diverter Gate

Pivot heavy product guides on a line and rely on the adjustable air cushion to decelerate the 32 kg load smoothly at the end of each fast stroke.

package_2

Washdown Carton Sealer

Cycle a sealing head in damp environments; the stainless barrel and rod resist mild corrosion while the -S magnet tracks position via DMSG sensors.

Is the Airtac MICJ Adjustable Mini Cylinder MICJ40X50-40S the Right Cylinder?

The 40 mm extend stop plus dual air cushions shine in fast set-position moves where you must tune the forward impact. Remember the stop screw sets the end position but is not a mid-stroke lock; the piston will drift on air loss, so fit an external rod lock or pilot check valve to hold a suspended load.

Mount this actuator using LB foot, FA flange or TC trunnion brackets (the SDB pivot block is not available on adjustable-stroke variants). You can also choose CA, U, R or CM back covers. The -S magnet enables CMSG, DMSG and EMSG switches for position sensing.

AirtacDistr lists every MICJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-micj40-adjustable-double-rod-cushioned-mini-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT / G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Do not dismantle the riveted front/back covers.
  • check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac MICJ Adjustable Mini Cylinder MICJ40X50-40S FAQ

The theoretical maximum force is 128.1 kgf at 1.0 MPa.

An external screw shortens the extend stroke by up to 40 mm on-site, letting you set the forward end position without swapping cylinders. The needle-adjustable air cushion at both ends decelerates the piston near stroke ends to absorb shock; it is not a mid-stroke lock or brake.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC MICJ Cylinders

Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ40X50-40S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for MICJ40X50-40S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.