
The AirTAC MICJ Adjustable Mini Cylinder MICJ40X500-10 is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø40mm bore and 500mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
Dial in a precise 490-500 mm forward stop on site with the AirTAC MICJ40X500-10, a round-body stainless steel mini cylinder built for heavy-duty pneumatic actuation. An external screw trims the extend end by up to 10 mm without swapping hardware, while a needle-adjustable air cushion at both ends soaks up high-speed impact. The barrel and piston rod use a riveted stainless construction that resists mild corrosion and washdown environments.
It runs on a 1/4 inch port and a 16 mm rod. Note this non-ISO-6432 size lacks a magnet, so it cannot host CMSG, DMSG or EMSG sensors.
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ40X500-10 |
|---|---|
| Series | MICJ mini cylinder |
| Bore size | Ø40 mm |
| Stroke | 500 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | 1/4" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø40 bore is a larger, non-ISO-6432 size.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 528 N |
| 0.7 MPa | 739 N |
| Max (@1.0 MPa) | 108 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| MICJ | round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 40 | Bore size in mm. |
| ×500 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Arrest pallets reliably in washdown zones; the stainless build resists moisture while the needle cushion absorbs the shock of the 32 kg safe load.
Extend 490-500 mm to fold large cartons, relying on the external stop screw to dial in the exact crease depth without reprogramming the motion controller.
The adjustable stop and dual cushions shine in fast set-position moves where you must tune the forward impact. For holding a suspended load during air loss, add an external rod lock or pilot check valve, as the stop screw sets the end position but is not a mid-stroke brake. Mount via LB foot, FA flange or TC trunnion, as the SDB pivot block is not offered on this adjustable variant.
AirtacDistr lists every MICJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-micj40-adjustable-double-rod-cushioned-mini-cylinder
Quick checklist
This 40 mm bore cylinder uses a 1/4 inch port. At 0.5 MPa it pushes 628.3 N and pulls 527.8 N. At 0.7 MPa it pushes 879.6 N and pulls 738.9 N. The theoretical maximum force is 128.1 kgf at 1.0 MPa.
An external screw shortens the extend stroke by up to 10 mm, letting you set the forward end position precisely. Needle valves adjust the air cushions at both ends to decelerate the piston at high speed. This SKU has no magnet so it cannot take sensors. The cushion only decelerates; it does not lock, so use an external rod lock to hold a load on air loss.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.