
The AirTAC MICJ Adjustable Mini Cylinder MICJ40X500-100 is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø40mm bore and 500mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
Trimming the forward end by up to 100 mm on site, this double-acting round-body mini cylinder lets you set a precise 400-500 mm extend position without changing hardware.
Twin adjustable air cushions soak up high-speed shock at both ends of the 30-800 mm/s travel. Because this SKU lacks the -S magnet, it cannot accept CMSG, DMSG or EMSG sensors; add the -S variant if you require position detection.
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ40X500-100 |
|---|---|
| Series | MICJ mini cylinder |
| Bore size | Ø40 mm |
| Stroke | 500 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | 1/4" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø40 bore is a larger, non-ISO-6432 size.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 528 N |
| 0.7 MPa | 739 N |
| Max (@1.0 MPa) | 108 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| MICJ | round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 40 | Bore size in mm. |
| ×500 | Stroke length in mm. |
| -100 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Shifts heavy pallets on a 500 mm run, using the 100 mm extend trim to dial in the exact divert arm position without remounting.
Folds large carton flaps at speed, relying on the twin adjustable air cushions to prevent end-of-stroke impact on the 400 mm stop.
The external stop screw and needle cushions excel in fast set-position moves, but remember the screw only trims the extend end and is not a mid-stroke lock. The piston will drift on air loss, so fit an external rod lock or pilot check valve for held loads. Mount via LB foot, FA flange or TC trunnion, as the SDB pivot block is not offered on this adjustable variant.
AirtacDistr lists every MICJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-micj40-adjustable-double-rod-cushioned-mini-cylinder
Quick checklist
This Ø40 bore double-acting cylinder uses a 1/4" port. At 0.5 MPa it pushes 628.3 N and pulls 527.8 N. At 0.7 MPa it pushes 879.6 N and pulls 738.9 N. The theoretical maximum force is 128.1 kgf at 1.0 MPa.
An external screw shortens the extend stroke by up to 100 mm, letting you set the forward end position without swapping cylinders. Needle valves adjust the air cushion at both ends to decelerate the piston near stroke ends. The stop screw is not a mid-stroke lock, and the cylinder will drift on air loss; use an external rod lock for holding. This non-S SKU has no magnet for sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.