
The AirTAC MICJ Adjustable Mini Cylinder MICJ40X500-100S is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø40mm bore and 500mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
Dial in a precise forward stop without swapping cylinders: the MICJ40X500-100S uses an external screw to shorten the extend stroke by up to 100 mm on-site, giving a usable forward range of 400-500 mm while retract remains full. This double-acting, round-body stainless-steel mini cylinder pairs that set-position flexibility with a variable air cushion at both ends, soaking up high-speed shock at the stroke limits.
Built with a stainless barrel and rod for mild washdown resistance, this non-ISO-6432 Ø40 unit pushes 628.3 N at 0.5 MPa. It features a 1/4" port, an M12x1.25 male rod thread, and a built-in magnet (-S) for CMSG, DMSG or EMSG sensors.
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ40X500-100S |
|---|---|
| Series | MICJ mini cylinder |
| Bore size | Ø40 mm |
| Stroke | 500 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | 1/4" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø40 bore is a larger, non-ISO-6432 size.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 528 N |
| 0.7 MPa | 739 N |
| Max (@1.0 MPa) | 108 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| MICJ | round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 40 | Bore size in mm. |
| ×500 | Stroke length in mm. |
| -100 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Pushing 30 kg loaded carts at high speed onto a branch line, using the 100 mm extend trim to dial the exact push distance while the dual cushions absorb the stop shock.
The adjustable stop plus dual cushions shine in fast set-position moves where you must tune the impact at the end of travel.
Mount using LB foot, FA flange or TC trunnion brackets (the SDB pivot-block is not offered on this adjustable variant). The stop screw and cushion only decelerate the piston near the end of travel; they do not hold the load on air loss, so add an external rod lock or pilot check valve for vertical loads.
AirtacDistr lists every MICJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-micj40-adjustable-double-rod-cushioned-mini-cylinder
Quick checklist
This Ø40 double-acting cylinder pushes 628.3 N and pulls 527.8 N at 0.5 MPa, and pushes 879.6 N / pulls 738.9 N at 0.7 MPa. The theoretical max force is 128.1 kgf at 1.0 MPa. It uses a 1/4" air port and a Ø16 mm piston rod with an M12x1.25 male thread.
An external screw shortens the extend stroke by up to 100 mm on-site, giving a 400-500 mm forward range, while the retract stroke stays full. Needle-set variable air cushions at both ends decelerate the piston near the ends to soak up high-speed shock. The -S suffix means it has a built-in magnet for CMSG, DMSG or EMSG sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.