
The AirTAC MICJ Adjustable Mini Cylinder MICJ40X500-20 is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø40mm bore and 500mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
Dial in a precise 480-500 mm extend end-position on site with the AirTAC MICJ40X500-20, a round-body stainless-steel mini cylinder featuring a 20 mm external stop screw. The needle-set variable air cushion at both ends soaks up high-speed shock, letting you set the forward stop and control the impact without swapping hardware. This double-acting actuator uses a 1/4" port and a Ø16 mm rod with an M12x1.25 male thread.
The stainless barrel and rod resist mild corrosion and washdown. Note this Ø40 bore is a non-ISO-6432 size. This SKU lacks a magnet, so it cannot take CMSG/DMSG/EMSG sensors; specify the -S variant if you need position detection.
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ40X500-20 |
|---|---|
| Series | MICJ mini cylinder |
| Bore size | Ø40 mm |
| Stroke | 500 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | 1/4" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø40 bore is a larger, non-ISO-6432 size.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 528 N |
| 0.7 MPa | 739 N |
| Max (@1.0 MPa) | 108 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| MICJ | round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 40 | Bore size in mm. |
| ×500 | Stroke length in mm. |
| -20 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Cycles at speed while the dual adjustable air cushions absorb end-of-stroke shock, protecting the 32 kg load from impact damage during fast extension.
Acts as a robust physical barrier for heavy pallets, using the stainless construction for washdown resistance and the external screw to fine-tune the blocking position.
At 0.5 MPa this Ø40 bore pushes 628.3 N and pulls 527.8 N. If you need less force, the smaller Ø32 bore pushes 402.2 N; there is no larger MICJ bore. The adjustable extend stop plus dual air cushions are ideal for fast, settable-position moves, but remember the cylinder does not hold its load on air loss—the piston drifts. For a held load, use an external rod lock or pilot check valve, as the stop screw and cushion only decelerate near the stroke end.
Mount using LB foot, FA flange, or TC trunnion brackets, or CA/U/R/CM back covers (SDB pivot-block is not available on this adjustable variant). Because this specific SKU has no -S magnet, it cannot accept magnetic switches.
AirtacDistr lists every MICJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-micj40-adjustable-double-rod-cushioned-mini-cylinder
Quick checklist
The theoretical maximum force is 128.1 kgf at 1.0 MPa.
An external screw shortens the extend stroke by up to 20 mm (usable range 480-500 mm), while needle valves adjust the air cushion at both ends to decelerate high-speed moves. This SKU has no magnet and cannot take sensors; the -S variant adds a magnet for CMSG/DMSG/EMSG switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.