
The AirTAC MICJ Adjustable Mini Cylinder MICJ40X500-20S is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø40mm bore and 500mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
Dial in a precise forward stop on-site with the AirTAC MICJ40X500-20S, a round-body stainless steel mini cylinder featuring a 20 mm adjustable extend stroke. An external stop screw trims the forward end position down from the 500 mm nominal maximum, while the full retract stroke remains unchanged.
Built with a stainless-steel barrel and piston rod, this riveted construction resists mild corrosion and washdown environments. It uses a 1/4" port and a male M12x1.25 rod thread. Needle-set adjustable air cushions at both ends soak up high-speed shock to protect your tooling. The built-in magnet (-S) supports CMSG, DMSG, and EMSG sensors for position feedback.
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ40X500-20S |
|---|---|
| Series | MICJ mini cylinder |
| Bore size | Ø40 mm |
| Stroke | 500 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | 1/4" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø40 bore is a larger, non-ISO-6432 size.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 528 N |
| 0.7 MPa | 739 N |
| Max (@1.0 MPa) | 108 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| MICJ | round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 40 | Bore size in mm. |
| ×500 | Stroke length in mm. |
| -20 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Performs repeatable forming operations in a damp packaging area, relying on the stainless steel round body to resist mild corrosion.
When sizing this 40 mm bore actuator, compare it directly against adjacent bores. This model is ideal for fast, settable-position moves where the 20 mm extend adjuster lets you fine-tune the forward stop without swapping physical components, and the dual air cushions decelerate the load at high speeds.
Remember that the stop screw sets the end position but does not function as a mid-stroke lock. A plain cylinder does not hold its load on air loss or when the valve is centered, as the piston will drift. For a held load, install an external rod lock or a pilot-operated check valve. For mounting, choose LB foot, FA flange, or TC trunnion styles (the SDB pivot-block is not available on this adjustable variant), and utilize the internal magnet for CMSG, DMSG, or EMSG switches.
AirtacDistr lists every MICJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-micj40-adjustable-double-rod-cushioned-mini-cylinder
Quick checklist
At 0.7 MPa, push increases to 879.6 N and pull to 738.9 N. The theoretical maximum force is 128.1 kgf at 1.0 MPa.
An external screw shortens the extend stroke by up to 20 mm on-site, while needle valves adjust the air cushions at both ends to decelerate high-speed movement. The -S suffix means it has a built-in magnet for CMSG/DMSG/EMSG sensors. The cushion only decelerates near the stroke end; it does not lock or hold the load on air loss.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.