
The AirTAC MICJ Adjustable Mini Cylinder MICJ40X500-40 is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø40mm bore and 500mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
Dial in the forward stop on site without swapping hardware using the AirTAC MICJ40X500-40. This double-acting round-body stainless-steel mini cylinder features an external screw that shortens the extend end position by up to 40 mm, giving a usable forward range of 460-500 mm, while an adjustable air cushion at both ends soaks up high-speed shock. The stainless barrel and piston rod resist mild corrosion and washdown environments.
Note that Ø40 is a non-ISO-6432 size, and because this SKU lacks the -S magnet, it cannot accept CMSG, DMSG, or EMSG sensors.
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ40X500-40 |
|---|---|
| Series | MICJ mini cylinder |
| Bore size | Ø40 mm |
| Stroke | 500 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | 1/4" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø40 bore is a larger, non-ISO-6432 size.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 528 N |
| 0.7 MPa | 739 N |
| Max (@1.0 MPa) | 108 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| MICJ | round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 40 | Bore size in mm. |
| ×500 | Stroke length in mm. |
| -40 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Divert heavy pallets at speed on a washdown line; the stainless build resists moisture while the dual adjustable air cushions absorb the impact of the 500 mm stroke.
Lift a 32 kg gate using the 0.5 MPa push force, using the external stop nut to fine-tune the open height and prevent mechanical crashing at the top.
When sizing this 40 mm bore, stepping down to the MICJ32 drops the 0.5 MPa push force to 402.2 N, while no larger standard MICJ bore exists above it. Choose this model when you need fast, repeatable set-position moves where the 40 mm extend stop screw and dual needle cushions prevent end-of-stroke banging.
Remember that the stop screw sets the end position but is not a mid-stroke lock; the piston will drift on air loss, so add an external rod lock or pilot check valve to hold a suspended load. Mount via LB foot, FA flange, or TC trunnion (SDB pivot-block is not available), and select the -S variant if you require position sensing.
AirtacDistr lists every MICJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-micj40-adjustable-double-rod-cushioned-mini-cylinder
Quick checklist
This 40 mm bore cylinder uses a 1/4" port. The theoretical maximum force is 128.1 kgf at 1.0 MPa.
An external screw shortens the extend stroke by up to 40 mm on site, while needle valves adjust the air cushion at both ends to decelerate the piston at high speed. The cushions only slow the piston near the end of travel; they do not act as a brake or mid-stroke lock, so the cylinder will drift if air pressure is lost.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.