
The AirTAC MICJ Adjustable Mini Cylinder MICJ40X500-40S is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø40mm bore and 500mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
Dial in a precise forward stop on-site with the AirTAC MICJ40X500-40S, a double-acting round-body mini cylinder featuring a 40 mm adjustable extend stroke. An external screw trims the forward end position from 460 to 500 mm, while a needle-set variable air cushion at both ends soaks up high-speed shock. The stainless-steel barrel and Ø16 mm rod shrug off mild corrosion and washdown environments.
The included -S piston magnet supports CMSG, DMSG and EMSG position switches for closed-loop feedback. Remember the stop screw only sets the end position; it is not a mid-stroke lock, and the cushion purely decelerates without holding the load on air loss.
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ40X500-40S |
|---|---|
| Series | MICJ mini cylinder |
| Bore size | Ø40 mm |
| Stroke | 500 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | 1/4" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø40 bore is a larger, non-ISO-6432 size.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 528 N |
| 0.7 MPa | 739 N |
| Max (@1.0 MPa) | 108 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| MICJ | round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 40 | Bore size in mm. |
| ×500 | Stroke length in mm. |
| -40 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Pushes cartons down firmly with a 32 kg safe vertical lift, relying on the dual adjustable air cushions to prevent slamming at the bottom of the 500 mm stroke.
Ejects machined components in a wet environment, utilizing the stainless barrel and rod for mild corrosion resistance while sensors confirm the retracted position.
Choose this model when you need fast, repeatable set-position moves where the dual cushions can absorb kinetic energy and the external screw dials in the exact 460-500 mm forward stop without swapping hardware.
Mount this cylinder using LB foot, FA flange or TC trunnion brackets, noting the SDB pivot-block is not offered on this adjustable variant. Because the -S magnet is present, you can directly mount CMSG, DMSG or EMSG sensors. If your process requires the load to stay put during a compressed air failure, add an external rod lock or pilot-operated check valve, because the air cushion only decelerates near stroke end and will not hold the piston in place.
AirtacDistr lists every MICJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-micj40-adjustable-double-rod-cushioned-mini-cylinder
Quick checklist
This 40 mm bore cylinder uses a 1/4" port and a Ø16 mm rod with an M12x1.25 male thread.
An external screw shortens the extend stroke by up to 40 mm on-site, giving a usable forward range of 460-500 mm, while the retract stroke remains full. Needle-set variable air cushions at both ends absorb high-speed shock. The -S suffix means a built-in magnet is present for CMSG, DMSG and EMSG sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.