
The AirTAC MICJ Adjustable Mini Cylinder MICJ40X500-50S is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø40mm bore and 500mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
Dial in a precise forward stop on-site with this 40mm bore round-body mini cylinder, which lets an external screw shorten the extend stroke by up to 50mm (usable range 450-500mm) without swapping parts. The stainless steel barrel and piston rod resist mild corrosion and washdown, while the built-in magnet (-S) supports CMSG, DMSG or EMSG sensors for position detection.
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ40X500-50S |
|---|---|
| Series | MICJ mini cylinder |
| Bore size | Ø40 mm |
| Stroke | 500 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | 1/4" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø40 bore is a larger, non-ISO-6432 size.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 528 N |
| 0.7 MPa | 739 N |
| Max (@1.0 MPa) | 108 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| MICJ | round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 40 | Bore size in mm. |
| ×500 | Stroke length in mm. |
| -50 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Shift heavy pallets at high speed on a 500mm run, using the 50mm extend trim to hit the exact divert position while the dual air cushions absorb the 32kg load impact.
Raise a 30kg access gate using the full extend stroke, fine-tuning the closed stop by 50mm on-site without disassembling the cylinder mount.
The 50mm extend adjustment plus dual air cushions are ideal for fast set-position moves where you must tune the forward impact. For holding a load on air loss, add an external rod lock or pilot check valve, as the stop screw and cushion only decelerate near the stroke end.
Mount using LB foot, FA flange or TC trunnion brackets (SDB pivot-block is not offered on this adjustable variant). The -S magnet enables reed or electronic sensors, and the 1/4" port feeds the 30-800 mm/s speed range.
AirtacDistr lists every MICJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-micj40-adjustable-double-rod-cushioned-mini-cylinder
Quick checklist
The theoretical maximum force is 128.1 kgf at 1.0 MPa.
An external stop screw shortens the extend stroke by up to 50mm (retract remains full). A needle-set variable air cushion at both ends decelerates the piston near the ends to soak up high-speed shock. The -S suffix means it has a built-in magnet for CMSG, DMSG or EMSG sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.