verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC MICJ Series · Mini Cylinder

Airtac MICJ Adjustable Mini Cylinder MICJ40X500-75S

The AirTAC MICJ Adjustable Mini Cylinder MICJ40X500-75S is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø40mm bore and 500mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.

  • BoreØ40 mm
  • Stroke500 mm
  • Port size1/4"
  • Acting typeDouble acting, double rod, adjustable stroke + cushion
  • Rod threadM12×1.25
  • CushionVariable air cushion, both ends
$169.40 $184.53Save 8% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every MICJ40 stroke, adjustment, mounting and version on one page All MICJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac MICJ Adjustable Mini Cylinder MICJ40X500-75S

Trimming the forward position by up to 75 mm without swapping cylinders, the AirTAC MICJ40X500-75S sets the extend end precisely from 425 mm to 500 mm while retracting fully. A needle-set variable air cushion at both ends soaks up high-speed shock, letting you tune the deceleration alongside the physical stop. Built as a stainless-steel round-body mini cylinder, it handles mild corrosion and washdown environments.

The 1/4" port and M12x1.25 male rod thread handle the airflow for speeds of 30-800 mm/s. Because this SKU includes the -S magnet, it supports CMSG, DMSG and EMSG sensors for position feedback.

Airtac MICJ Adjustable Mini Cylinder MICJ40X500-75S Technical Specifications

ModelAirtac MICJ Adjustable Mini Cylinder MICJ40X500-75S
SeriesMICJ mini cylinder
Bore sizeØ40 mm
Stroke500 mm
Acting typeDouble acting, double rod, adjustable stroke + cushion
Port size1/4"
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionVariable air cushion, both ends
Max standard strokeUp to 500 mm

Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø40 bore is a larger, non-ISO-6432 size.

Theoretical Output Force (Ø40mm)

PressureForce (both ways)
0.5 MPa528 N
0.7 MPa739 N
Max (@1.0 MPa)108 kgf

MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).

Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ40X500-75S

MICJround-body mini cylinder (adjustable-stroke, variable cushion).
40Bore size in mm.
×500Stroke length in mm.
-75Adjustable stroke window (mm the extend stroke can be shortened on site).
-SOptional built-in magnet for CMSG / DMSG / EMSG sensors.

MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.

Where the Airtac MICJ Adjustable Mini Cylinder MICJ40X500-75S Is Used

conveyor_belt

High-Speed Diverting

Tune the dual air cushions to absorb shock when pushing 32 kg loads at high cycle rates on a packaging line.

warehouse

Washdown Ejection

Leverage the stainless steel construction to eject products reliably in damp or mildly corrosive washdown environments.

Is the Airtac MICJ Adjustable Mini Cylinder MICJ40X500-75S the Right Cylinder?

The external stop screw is ideal for fast set-position moves, but remember it only trims the extend end and is not a mid-stroke lock. If the load must be held on air loss, add an external rod lock or pilot-operated check valve, as the piston will drift. Mount via LB foot, FA flange or TC trunnion, noting that the SDB pivot-block is not offered on this adjustable variant.

AirtacDistr lists every MICJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-micj40-adjustable-double-rod-cushioned-mini-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT / G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Do not dismantle the riveted front/back covers.
  • check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac MICJ Adjustable Mini Cylinder MICJ40X500-75S FAQ

This double-acting cylinder uses a 1/4" port and an M12x1.25 male rod thread.

An external screw shortens the extend stroke by up to 75 mm on-site, while needle valves tune the variable air cushions at both ends to decelerate the load. The included -S magnet enables CMSG, DMSG and EMSG sensors for position detection.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC MICJ Cylinders

Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ40X500-75S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for MICJ40X500-75S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.