Airtac SAI40 Standard Air Cylinder SAI40X700
The AirTAC Airtac SAI40 Standard Air Cylinder SAI40X700 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 700mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ40 mm
- Stroke700 mm
- Port sizeG1/4
- Acting typeDouble acting
- Rod threadM12×1.25
- CushionAdjustable, 30 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAI40 Standard Air Cylinder SAI40X700
The AirTAC SAI40X700 is a double-acting ISO 15552 profile cylinder featuring a 40mm bore and a 700mm stroke. It generates 628N of push force and 528N of pull force at 0.5 MPa, making it well-suited for medium-duty positioning tasks. The extruded aluminum barrel omits tie-rods, presenting a clean exterior that speeds up machine cleaning and sensor placement.
This specific configuration utilizes a standard carbon steel piston rod and features PT tapered port threading on the G1/4 connection. Without a built-in magnet, it is optimized for purely mechanical actuation. Adjustable air cushions at both stroke ends absorb kinetic energy, ensuring smooth stops even at the maximum operating speed of 800 mm/s.
Airtac SAI40 Standard Air Cylinder SAI40X700 Technical Specifications
| Model | Airtac SAI40 Standard Air Cylinder SAI40X700 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAI40 Standard Air Cylinder SAI40X700
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAI40 Standard Air Cylinder SAI40X700 Is Used
Package Diversion
Drives long-stroke routing arms on packaging lines to divert cartons between parallel conveyor belts over a 700mm span.
Multi-Stage Ejection
Executes extended reach ejection of machined aluminum parts from an enclosed CNC cell, utilizing the full 700mm stroke.
Vertical Lift Gate
Actuates lightweight access gates or safety barriers on automated storage retrieval systems requiring 879N push force at 0.7 MPa.
Is the Airtac SAI40 Standard Air Cylinder SAI40X700 the Right Cylinder?
When selecting this actuator, compare its 628N push force at 0.5 MPa against the smaller SAI32 bore (402N push) or the larger SAI50 bore (982N push) to match your load requirements. At a 700mm stroke, the extended rod is highly susceptible to bending under side loads. To prevent premature rod-bearing failure, pair this cylinder with an external guide rail or utilize a fully guided linear slide.
This unit serves as a direct dimensional drop-in replacement for any ISO 15552 cylinder. To complete your assembly, pair it with FA or FB flange mounts, and note that adding an -S magnet variant is required if you intend to track piston position using DMSE or CMSE switches. If the application demands fail-safe holding without continuous air pressure, explore the SAIL locking variant instead of relying on the cushions.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAI40 Standard Air Cylinder SAI40X700 FAQ
At an operating pressure of 0.7 MPa, the SAI40X700 generates 879N of push force and 740N of pull force. At 0.5 MPa, it provides 628N of push force.
Yes, the SAI40X700 is dimensionally interchangeable per ISO 15552 standards. It matches standard mounting footprints and G1/4 port locations, serving as a direct drop-in replacement.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAI40 Standard Air Cylinder SAI40X700
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.