Airtac SAI40 Standard Air Cylinder SAI40X100
The AirTAC Airtac SAI40 Standard Air Cylinder SAI40X100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 100mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ40 mm
- Stroke100 mm
- Port sizeG1/4
- Acting typeDouble acting
- Rod threadM12×1.25
- CushionAdjustable, 30 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAI40 Standard Air Cylinder SAI40X100
The AirTAC SAI40X100 is a double-acting ISO 15552 profile cylinder engineered to deliver 628 N of push force at 0.5 MPa and 879 N at 0.7 MPa. Its 100 mm stroke provides an optimal mid-range extension for general automation tasks. The extruded aluminum barrel design omits tie-rods, presenting a clean exterior that speeds up assembly and maintenance.
This configuration features a standard carbon steel piston rod and a PT tapered G1/4 port thread. Because it lacks a factory magnet, position sensing requires external limit switches. For high-temperature environments up to 70 C, the standard TPU seals handle the job, though Viton H seal variants are available across the SAI family for more extreme thermal demands.
Airtac SAI40 Standard Air Cylinder SAI40X100 Technical Specifications
| Model | Airtac SAI40 Standard Air Cylinder SAI40X100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAI40 Standard Air Cylinder SAI40X100
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAI40 Standard Air Cylinder SAI40X100 Is Used
Component Clamping
Secures medium-weight machined parts during milling with 879 N of clamping force at 0.7 MPa.
Package Diverting
Extends 100 mm to push cartons off a sorting line with rapid 30-800 mm/s actuation speeds.
Gate Operation
Cycles lightweight access doors and machine guards using a durable carbon steel rod.
Is the Airtac SAI40 Standard Air Cylinder SAI40X100 the Right Cylinder?
Select the 40 mm bore when an application demands more power than a 32 mm bore (402 N at 0.5 MPa) but does not warrant the bulk of a 50 mm bore (982 N at 0.5 MPa). At a 100 mm stroke, the rod bearing handles side loads effectively without requiring external guides. To mount this unit, utilize standard ISO 15552 accessories like FA flanges or LB foot brackets. Specify a -S suffix if you later require internal CMSE or DMSE sensors.
Remember that standard air cushions only decelerate the piston near the stroke endpoints; they do not lock the rod. If your fixture loses pneumatic pressure, the load will drift. Use a SAIL variant with an air-released lock or an external pilot check valve for fail-safe position holding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAI40 Standard Air Cylinder SAI40X100 FAQ
The SAI40X100 generates 628 N of push force and 528 N of pull force at 0.5 MPa. At 0.7 MPa, the push force increases to 879 N.
Yes. The SAI40X100 is dimensionally interchangeable per ISO 15552, meaning it matches the mounting interface and footprint of other standard ISO 15552 profile cylinders.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAI40 Standard Air Cylinder SAI40X100
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.