
The AirTAC SAID63 Double Rod Cylinder SAID63AX10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 10mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID63X10 is a double-acting, double-rod ISO 15552 profile cylinder engineered for symmetric force delivery. Because a piston rod exits both end covers, the annulus area is identical on extend and retract, yielding exactly 1402 N of force in each direction at 0.5 MPa. This 10 mm stroke variant is purpose-built for compact, high-force clamping or short-index motions.
Configured with a SUS420J2 stainless steel rod and PT tapered port threads, the extruded aluminum barrel features sensor grooves on both sides. The twin-rod architecture inherently resists rotation and allows a secondary cam or position flag to be mounted on the rear rod extension.
| Model | Airtac SAID63 Double Rod Cylinder SAID63AX10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 10 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Provides 1402 N of equal clamping and release force for holding heavy workpieces in automated machining fixtures.
Drives a dual-sided transfer mechanism where the rear rod simultaneously shifts a secondary gate or diverter at the same speed.
Uses the twin-rod geometry to prevent piston drift and rotation during precise 10 mm component indexing operations.
Select this 63 mm bore when an application requires matched push and pull forces in a very short stroke, stepping up from a 50 mm bore (825 N at 0.5 MPa) for heavier compact duties. A double-rod design is preferred over a single-rod SAI when the mechanism needs dual-side guidance, anti-rotation stability, or rear-rod actuation. It uses the reduced SAID mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and omits FB, CA, CB, and CR brackets.
Note that the adjustable air cushions only decelerate the piston near stroke end and do not lock the load; if position holding without air pressure is required, consider a SAIL or BSAID variant. Without a magnet, this unit does not support CMSE or DMSE solid-state sensors.
AirtacDistr lists every SAID63 order code with its price on one page at https://airtacdistr.com/products/airtac-said63-double-rod-iso-cylinder
Quick checklist
Because it is a double-rod cylinder, the output force is identical in both directions due to equal piston annulus areas. It delivers 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and 2523 N at 0.9 MPa for both extend and retract strokes.
Yes, the SAID63X10 is dimensionally interchangeable per ISO 15552 standards. It shares the exact mounting footprint of other ISO 15552 profile cylinders, though it uses AirTAC's specific mounting accessory set (Basic, FA, LB, TC, FTC, TCM1, TCM2).
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.