
The AirTAC SAI63 Standard Cylinder SAI63X200 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 200mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAI63X200 is a double-acting ISO 15552 profile cylinder engineered to deliver a push force of 1559 N at 0.5 MPa. Its 200 mm stroke provides the extended travel needed for mid-range material handling and automated clamping tasks. The extruded aluminum barrel design omits tie-rods, yielding a cleaner exterior that resists debris accumulation.
This standard configuration features a carbon steel piston rod and PT tapered port threads (G3/8). Because it lacks an integrated magnet, position sensing requires external switches. For operations experiencing thermal extremes, the standard TPU seals can be swapped for Viton (H) or NBR (N) compounds to match specific environmental demands.
| Model | Airtac SAI63 Standard Cylinder SAI63X200 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Provides reliable 1559 N clamping force at 0.5 MPa for securing mid-sized metal components during machining operations.
Utilizes the 200 mm stroke to push standard-sized cartons or totes smoothly across packaging line transitions.
Cycles at speeds up to 800 mm/s to eject formed parts from light-duty pneumatic presses without delaying cycle times.
Selecting this 63 mm bore makes sense when a 50 mm bore falls short—offering 982 N at 0.5 MPa—or when an 80 mm bore (2513 N at 0.5 MPa) would be excessive. The 200 mm stroke operates safely within standard length parameters, so no external guide is strictly required for typical loads. However, always verify side-load conditions to prevent premature rod-bearing wear.
As a dimensionally interchangeable ISO 15552 unit, it serves as a direct replacement for other profile cylinders matching the 63 mm bore, 200 mm stroke, G3/8 PT port, and standard mounting accessory footprints. If your machinery must maintain vertical position after a pressure loss, specify the SAIL variant with an air-released lock rather than relying on the standard air cushion.
Quick checklist
At 0.5 MPa operating pressure, this cylinder generates 1559 N of push force and 1402 N of pull force. If pressure increases to 0.7 MPa, the push force rises to 2182 N.
Yes. The SAI63X200 is dimensionally interchangeable per ISO 15552 standards, meaning it shares identical mounting dimensions, 63 mm bore, 200 mm stroke, and G3/8 port locations with other compliant profile cylinders.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.