
The AirTAC SAID63 Double Rod Cylinder SAID63AX1000 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 1000mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID63X1000 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 63mm bore and 1000mm stroke. Because the piston rod extends from both end covers, the annulus area is identical on extend and retract, yielding a perfectly balanced 1402N of force in either direction at 0.5 MPa. The extended rear rod provides a secondary mounting point for a cam, position flag, or secondary tool, while improving load guidance against torsional rotation.
This variant is configured with an SUS420J2 stainless steel rod for superior corrosion resistance and features adjustable air cushions at both ends to decelerate the piston smoothly. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch mounting. Note that a plain SAID does not hold its position if air pressure is lost; use a SAIL or BSAID variant if fail-safe locking is required.
| Model | Airtac SAID63 Double Rod Cylinder SAID63AX1000 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 1000 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×1000 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a transfer carriage where the equal 1402N push and pull forces prevent stalling or asymmetric acceleration across the 1000mm travel.
The twin-rod architecture keeps the load perfectly guided over the long 1000mm stroke, preventing deflection without external guide rails.
Mounts a mechanical cam or position flag on the rear rod to trigger external mechanical limit switches independent of internal pneumatic sensors.
Selecting this 63mm bore makes sense when you need more force than the 50mm version (825N at 0.5 MPa) but do not require the heavier 80mm class (2268N). A double-rod design is specifically chosen over a single-rod SAI when the mechanism requires anti-rotation guidance, dual-side workpiece mounting, or rear-rod position sensing. As a dimensionally interchangeable ISO 15552 cylinder, it serves as a direct replacement for other ISO 15552 double-rod cylinders.
For this 1000mm stroke, the unsupported rod length is substantial. Despite the robust 20mm rod diameter, side-load bending moments can strain the rod bearings; an external guide rail is strongly recommended to prevent premature wear. Mounting accessories are limited to the SAID set: Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, and CR). The fluid port is G3/8, and the rod thread is M16x1.5. Speed ranges from 30-800 mm/s.
AirtacDistr lists every SAID63 order code with its price on one page at https://airtacdistr.com/products/airtac-said63-double-rod-iso-cylinder
Quick checklist
It provides 1402N of force at 0.5 MPa, 1962N at 0.7 MPa, and 2523N at 0.9 MPa. Because it is a double-rod cylinder, these pull-side figures apply equally to both the extend and retract strokes.
Yes, the SAID63X1000 shares standard ISO 15552 mounting interface dimensions, making it dimensionally interchangeable with other ISO 15552 double-rod profile cylinders. It uses a G3/8 port and M16x1.5 rod thread.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.