
The AirTAC SAID63 Double Rod Cylinder SAID63AX10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 10mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID63X10-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 63mm bore and a 10mm non-standard stroke. Because a rod exits both end covers, the annulus area is identical on both sides, yielding equal push and pull forces of 1402 N at 0.5 MPa. This through-rod design allows mounting the primary workpiece on one end and a secondary cam, position flag, or sensor target on the opposite end.
This specific configuration includes an SUS420J2 stainless steel rod (material code A) for enhanced corrosion resistance and a -S magnet for use with AirTAC CMSE reed and DMSE electronic sensors. The integrated adjustable air cushions at both ends decelerate the piston near stroke end, but note that a plain SAID does not hold a load if air pressure is lost; use a SAIL or BSAID variant if pilot-operated locking is required.
| Model | Airtac SAID63 Double Rod Cylinder SAID63AX10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 10 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a shuttle mechanism where the equal 1402 N extend and retract forces prevent directional drift, ensuring identical push and pull dynamics.
Mounts the primary tool on the front rod and a secondary cam or limit flag on the rear protruding rod to trigger external pneumatic valves.
Utilizes the twin-rod architecture to guide heavy vertical loads without twisting, replacing bulkier external guide rails in tight spaces.
Choose this 63mm bore double-rod cylinder when an application demands equal force and speed in both directions, or requires dual-side guidance to prevent rotation. It provides 1402 N each way at 0.5 MPa. If your mechanism needs less force, step down to the 50mm bore (825 N both ways); if you need more, step up to the 80mm bore (2268 N both ways). Unlike a single-rod SAI, the SAID twin-rod design supports a secondary mechanism on the rear rod extension.
This SAID63X10-S features a PT tapered port (G3/8 equivalent interface), a 20mm rod with M16x1.5 thread, and operates at 30-800 mm/s. It is dimensionally interchangeable per ISO 15552 and uses the reduced SAID mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2), omitting the FB, CA, CB, and CR brackets found on single-rod variants. Because the stroke is a short 10mm made-to-order length, ensure the overall rear-rod protrusion clearance fits your frame.
AirtacDistr lists every SAID63 order code with its price on one page at https://airtacdistr.com/products/airtac-said63-double-rod-iso-cylinder
Quick checklist
Because the double-rod design subtracts the rod area from both sides of the piston, the force is equal in both directions. It provides 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and 2523 N at 0.9 MPa.
Yes, it is dimensionally interchangeable with ISO 15552 profile cylinders. However, SAID uses a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and omits the FB, CA, CB, and CR brackets which are strictly for single-rod SAI cylinders.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.