verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAID63 Double Rod Cylinder SAID63AX110

The AirTAC SAID63 Double Rod Cylinder SAID63AX110 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 110mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ63 mm
  • Stroke110 mm
  • Port sizeG3/8
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 36 mm
$138.61 $146.11Save 5% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SAID63 stroke, mounting and version on one page All SAID63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SAID63 Double Rod Cylinder SAID63AX110

The AirTAC SAID63X110 is a double-acting, double-rod profile cylinder operating on the ISO 15552 mounting interface. Because a rod exits both ends, the annulus area is identical on extend and retract, yielding exactly 1402 N of force in both directions at 0.5 MPa. The piston speed operates smoothly across the 30-800 mm/s range.

This specific configuration utilizes SUS420J2 stainless steel for the rods (material code A) for enhanced corrosion resistance. The extruded aluminum barrel features sensor grooves on both sides, and the rear rod end can be used to mount a cam or position flag for dual-side tracking.

Airtac SAID63 Double Rod Cylinder SAID63AX110 Technical Specifications

ModelAirtac SAID63 Double Rod Cylinder SAID63AX110
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ63 mm
Stroke110 mm
Acting typeDouble acting
Port sizeG3/8
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1402 N1402 N
0.7 MPa1962 N—
Max (@1.0 MPa)286 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAID63 Double Rod Cylinder SAID63AX110

SAIISO 15552 profile-barrel cylinder series.
63Bore size in mm.
×110Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAID63 Double Rod Cylinder SAID63AX110 Is Used

sync_alt

Symmetric Transfer

Drives a workpiece from one side while moving an identical payload on the rear rod end, keeping motion balanced and forces equal.

straighten

Anti-Rotation Slide

Twin rods guide the load against twisting forces far better than a single rod, ensuring precise linear tracking without lateral drift.

settings_input_component

Rear-End Sensing

Uses the protruding rear rod to trip an external limit switch or carry a cam, keeping the primary work area clear of sensors.

Is the Airtac SAID63 Double Rod Cylinder SAID63AX110 the Right Cylinder?

Choose this 63 mm bore when an application requires symmetric force and speed, as it provides 1402 N both ways at 0.5 MPa. If your mechanism needs less force, step down to the 50 mm bore which provides 825 N each way; if you need more push or pull, the 80 mm bore offers 2268 N. A double-rod design is preferred over a single-rod SAI when you need superior anti-rotation guidance or must drive a secondary mechanism from the rear.

This cylinder uses PT tapered port threads and accepts the reduced SAID mounting set: Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, and CR). Note that the adjustable air cushions only decelerate the piston near stroke end; they do not hold a load. If air pressure is lost, the cylinder will drift, so an external rod lock or a BSAID clamp-lock cylinder is required for position holding.

AirtacDistr lists every SAID63 order code with its price on one page at https://airtacdistr.com/products/airtac-said63-double-rod-iso-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAID63 Double Rod Cylinder SAID63AX110 FAQ

Because it is a double-rod cylinder, the effective piston area is the same on both sides. It outputs 1402 N in both extend and retract directions at 0.5 MPa, and 1962 N at 0.7 MPa.

Yes, the SAID63X110 is dimensionally interchangeable per ISO 15552. It serves as a direct replacement for other ISO 15552 double-rod profile cylinders, matching standard mounting dimensions and port sizes.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAID63 Double Rod Cylinder SAID63AX110

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SAID63AX110 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.