verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAID63 Double Rod Cylinder SAID63AX115

The AirTAC SAID63 Double Rod Cylinder SAID63AX115 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 115mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ63 mm
  • Stroke115 mm
  • Port sizeG3/8
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 36 mm
$138.61 $146.11Save 5% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SAID63 stroke, mounting and version on one page All SAID63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SAID63 Double Rod Cylinder SAID63AX115

The AirTAC SAID63X115 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 63mm bore and 115mm stroke. Because a piston rod extends from both end covers, the annulus area is identical on the extend and retract sides, yielding a perfectly symmetric output of 1402 N each way at 0.5 MPa. It operates at speeds between 30 and 800 mm/s and uses adjustable air cushions at both ends to decelerate the payload smoothly.

This variant is equipped with SUS420J2 stainless steel rods (material code A) for enhanced corrosion resistance and utilizes PT tapered port threads. The extruded aluminum barrel includes sensor grooves on both sides for mounting position switches. The rear rod protrusion allows you to drive a primary workpiece on one end while mounting a cam, position flag, or secondary mechanism on the opposite end for dual-side guidance and superior anti-rotation resistance.

Airtac SAID63 Double Rod Cylinder SAID63AX115 Technical Specifications

ModelAirtac SAID63 Double Rod Cylinder SAID63AX115
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ63 mm
Stroke115 mm
Acting typeDouble acting
Port sizeG3/8
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1402 N1402 N
0.7 MPa1962 N—
Max (@1.0 MPa)286 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAID63 Double Rod Cylinder SAID63AX115

SAIISO 15552 profile-barrel cylinder series.
63Bore size in mm.
×115Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAID63 Double Rod Cylinder SAID63AX115 Is Used

sync_alt

Symmetric Force Transfer

Drives a secondary mechanism from the rear rod while the front rod handles the primary workpiece, maintaining equal 1402 N force and speed in both directions.

straighten

Anti-Rotation Slides

The twin-rod architecture prevents piston rotation during travel, making it ideal for guiding precision tooling or heavy fixtures that require strict angular stability.

view_module

Twin-Station Actuation

Operates dual stations simultaneously from a single cylinder body, using the through-rod design to push and pull opposing loads with identical kinematics.

Is the Airtac SAID63 Double Rod Cylinder SAID63AX115 the Right Cylinder?

Choose this 63mm bore when an application demands equal push and pull forces (1402 N at 0.5 MPa) alongside anti-rotation guidance. If your payload is lighter, stepping down to the 50mm bore yields 825 N both ways; for heavier symmetric loads, the 80mm bore provides 2268 N. A double-rod design is preferred over a single-rod SAI when you need to actuate twin stations or require a rear rod for external tracking. To ensure accurate direct replacement, match the 115mm stroke, PT port threads, and the ISO 15552 mounting interface.

Note that a plain SAID cylinder does not hold its position or load if air pressure is lost or the valve is centered; the piston will drift. The integrated air cushions only decelerate motion near stroke end, acting purely as end-of-stroke bumpers rather than holding brakes. For fail-safe load holding, consider an external pilot-operated check valve or the SAIL series.

AirtacDistr lists every SAID63 order code with its price on one page at https://airtacdistr.com/products/airtac-said63-double-rod-iso-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAID63 Double Rod Cylinder SAID63AX115 FAQ

Because the double-rod design occupies area on both sides of the piston, the effective annulus area is identical in both directions. The SAID63X115 delivers an equal force of 1402 N both ways at 0.5 MPa, 1962 N at 0.7 MPa, and 2523 N at 0.9 MPa.

Yes, the SAID63X115 is dimensionally interchangeable per ISO 15552. It supports a reduced set of mountings including Basic, FA, LB, TC, FTC, TCM1, and TCM2. It omits the FB, CA, CB, and CR brackets found on single-rod variants to accommodate the rear rod protrusion.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAID63 Double Rod Cylinder SAID63AX115

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SAID63AX115 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.