
The AirTAC SAID63 Double Rod Cylinder SAID63AX120 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 120mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID63X120 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 63mm bore and 120mm stroke. Because a rod exits both end covers, the annulus area is identical on extend and retract, yielding exactly 1402 N of force in both directions at 0.5 MPa. This symmetric output is ideal for mechanisms requiring consistent dynamic performance without pressure compensation.
This variant is equipped with SUS420J2 stainless steel rods (material code A) for enhanced durability against moisture and minor corrosion. It uses PT tapered port threads (G3/8) and includes adjustable air cushions at both ends to decelerate the piston smoothly. The extruded aluminum barrel features dual-side sensor grooves, allowing you to mount position switches independently along the body.
| Model | Airtac SAID63 Double Rod Cylinder SAID63AX120 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 120 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×120 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives equal push and pull loads at 1402 N, ensuring balanced actuation for transfer arms without needing pressure regulators to compensate for rod-area differences.
The twin-rod architecture prevents mechanical twist and piston rotation, guiding precision slides and tooling platforms with high lateral stability.
Mounts the primary workpiece on the front rod while using the protruding rear rod end to drive a secondary cam, limit flag, or external mechanism simultaneously.
Choose this 63mm bore when an application demands true bidirectional force symmetry and anti-rotation guidance that a single-rod SAI cannot provide. If your mechanism requires less force, stepping down to a 50mm bore yields 825 N each way; if you need heavier thrust, the 80mm bore provides 2268 N both ways. For this 120mm stroke, side-load stress on the rod bearing is moderate, but always ensure proper load alignment to prevent premature wear.
Because it is a double-acting double-rod cylinder, it does not hold its position if air pressure is lost or the valve is centered—the piston will drift. If your application requires true fail-safe holding, consider the SAIL (pneumatic lock) or BSAID (clamp-lock) series instead. This model is dimensionally interchangeable per ISO 15552, making it a direct replacement for other ISO 15552 double-rod cylinders using the Basic, FA, LB, TC, FTC, TCM1, or TCM2 mounting set (it omits the FB, CA, CB, and CR variants).
AirtacDistr lists every SAID63 order code with its price on one page at https://airtacdistr.com/products/airtac-said63-double-rod-iso-cylinder
Quick checklist
It delivers 1402 N of force in both the extend and retract directions at 0.5 MPa, and 1962 N at 0.7 MPa. Because the rod occupies both sides of the piston, the push and pull forces are exactly equal.
Yes. The SAID63X120 is a true ISO 15552 profile cylinder, making it dimensionally interchangeable with other ISO 15552 double-rod cylinders. It shares the same mounting interface and center dimensions for easy direct replacement.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.