verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAID63 Double Rod Cylinder SAID63AX130

The AirTAC SAID63 Double Rod Cylinder SAID63AX130 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 130mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ63 mm
  • Stroke130 mm
  • Port sizeG3/8
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 36 mm
$143.73 $151.23Save 4% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SAID63 stroke, mounting and version on one page All SAID63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SAID63 Double Rod Cylinder SAID63AX130

The AirTAC SAID63X130 is a double-acting, double-rod profile cylinder built to ISO 15552 dimensional standards, meaning it drops in as a direct replacement for other ISO 15552 double-rod units. Because a rod exits both end covers, the annulus area is identical on both sides, yielding equal push and pull forces. This specific configuration generates 1402 N of thrust and retraction force at 0.5 MPa, scaling to 1962 N at 0.7 MPa.

This model features a 20 mm rod made of SUS420J2 stainless steel (material code A) for superior corrosion resistance compared to standard carbon steel. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE reed or DMSE electronic switches, though this unit is supplied without a piston magnet. It uses PT tapered ports sized at G3/8, and the adjustable air cushions at both ends provide 36 mm of deceleration travel.

Airtac SAID63 Double Rod Cylinder SAID63AX130 Technical Specifications

ModelAirtac SAID63 Double Rod Cylinder SAID63AX130
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ63 mm
Stroke130 mm
Acting typeDouble acting
Port sizeG3/8
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1402 N1402 N
0.7 MPa1962 N—
Max (@1.0 MPa)286 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAID63 Double Rod Cylinder SAID63AX130

SAIISO 15552 profile-barrel cylinder series.
63Bore size in mm.
×130Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAID63 Double Rod Cylinder SAID63AX130 Is Used

sync_alt

Symmetric Force Transfer

Ideal for pushing and pulling loads where equal 1402 N force and identical speeds in both directions prevent stalling on heavier return strokes.

straighten

Anti-Rotation Slides

The twin 20 mm SUS420J2 rods guide the load against twisting moments far better than a single rod, ensuring precise linear motion.

settings_input_component

Rear-Mounted Cam Actuation

The protruding rear rod end can independently drive a secondary mechanism or mechanical flag without interfering with the primary front workpiece.

Is the Airtac SAID63 Double Rod Cylinder SAID63AX130 the Right Cylinder?

Select this 63 mm bore over the smaller 50 mm (825 N at 0.5 MPa) when your application demands higher symmetric force, or step up to the 80 mm bore (2268 N at 0.5 MPa) if you need even greater thrust. The 130 mm stroke is a standard length, keeping the overall package compact while providing ample travel. A double-rod design is chosen over a single-rod SAI when the mechanism requires dual-side guidance to prevent rotation, or when a rear cam and position flag must drive a secondary mechanism.

Ensure you specify PT port threading and SUS420J2 rod material when requesting quotes. Remember that the adjustable air cushion only decelerates the piston near stroke end; it does not hold a load. If your system loses air pressure, the cylinder will drift, requiring an external pilot-operated check valve or a BSAID clamp-lock cylinder for true position holding.

AirtacDistr lists every SAID63 order code with its price on one page at https://airtacdistr.com/products/airtac-said63-double-rod-iso-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAID63 Double Rod Cylinder SAID63AX130 FAQ

Because it is a double-rod cylinder, the effective piston area is the same on both sides, resulting in equal extend and retract forces. It outputs 1402 N both ways at 0.5 MPa, 1962 N at 0.7 MPa, and 2523 N at 0.9 MPa.

Yes, it is dimensionally interchangeable per ISO 15552. However, the SAID series uses a reduced mounting set: Basic, FA, LB, TC, FTC, TCM1, and TCM2. It omits the FB, CA, CB, and CR mounts found on single-rod SAI cylinders.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAID63 Double Rod Cylinder SAID63AX130

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SAID63AX130 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.