
The AirTAC SAID63 Double Rod Cylinder SAID63AX135 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 135mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID63X135 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 63mm bore and 135mm stroke. Because a rod exits both end covers, the annulus area is identical on extend and retract, yielding an equal 1402 N of thrust in either direction at 0.5 MPa. This symmetric force output is ideal for mechanisms requiring perfectly balanced push and pull dynamics.
This variant is configured with SUS420J2 stainless steel rods (material code A) for enhanced corrosion resistance and utilizes PT tapered port threads. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch placement. A rear rod protrusion allows engineers to mount a secondary cam, position flag, or separate mechanism opposite the primary workpiece, providing superior anti-rotation guidance compared to a single-rod SAI.
| Model | Airtac SAID63 Double Rod Cylinder SAID63AX135 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 135 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×135 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives transfer shuttles where the 1402 N push and pull forces must remain perfectly equal to prevent drive stalling in either direction.
Operates twin machining stations simultaneously by mounting one workpiece on the front rod end and a secondary tool on the rear protrusion.
Guides heavy vertical lifting slides without twisting, leveraging the dual-rod architecture to resist torsional deflection across the 135mm stroke.
Choose this 63mm bore double-rod actuator when an application demands equal bi-directional force and twin-side guidance. If your mechanism requires less thrust, stepping down to the 50mm bore yields 825 N both ways at 0.5 MPa; conversely, upgrading to the 80mm bore provides 2268 N. The 20mm rod diameter and M16x1.5 thread offer robust side-load capacity, though external guides are recommended for heavy radial loads. This cylinder uses the reduced SAID mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and omits FB, CA, CB, and CR accessories. It is dimensionally interchangeable per ISO 15552. Note that the adjustable air cushions only decelerate the piston near stroke end; this cylinder will drift if air pressure is lost, so use a SAIL lock or BSAID clamp-lock for position holding. Since no magnet (-S) is specified, it will not trigger CMSE or DMSE sensors.
AirtacDistr lists every SAID63 order code with its price on one page at https://airtacdistr.com/products/airtac-said63-double-rod-iso-cylinder
Quick checklist
It delivers 1402 N of force at 0.5 MPa, 1962 N at 0.7 MPa, and 2523 N at 0.9 MPa. Because it is a double-rod design, these pull-side figures apply equally to both the extend and retract directions.
Yes, it is dimensionally interchangeable with ISO 15552 profile cylinders. It supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts, but omits FB, CA, CB, and CR brackets which are specific to single-rod SAI models.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.