
The AirTAC SAID63 Double Rod Cylinder SAID63AX140 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 140mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID63X140 is a double-acting, double-rod ISO 15552 profile cylinder engineered to deliver exactly 1402 N of thrust and pull at 0.5 MPa. Because a piston rod occupies both working chambers, the annulus area is identical on extend and retract, ensuring perfectly symmetric force and speed in both directions. This through-rod design allows you to mount a primary workpiece on the front end while utilizing the rear rod end for a cam, position flag, or secondary mechanism.
Built with an SUS420J2 stainless steel rod (material code A), this 63 mm bore cylinder provides excellent resistance to corrosion and moisture. It features PT tapered port threads and integrated sensor grooves on both sides of the extruded aluminum barrel. While it lacks a piston magnet, the symmetrical layout inherently resists rotational torque better than a single-rod configuration.
| Model | Airtac SAID63 Double Rod Cylinder SAID63AX140 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 140 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×140 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a transfer shuttle where the 1402 N extend and retract forces must be perfectly matched to push and pull identical workpiece masses without speed variation.
Powers a vertical lifting slide where the twin-rod architecture prevents the load from twisting under offset weights, maintaining strict guidance.
Actuates two separate mechanisms in sequence by mounting the primary tool on the front rod end and a secondary cam or driver on the rear protrusion.
Select this 63 mm bore double-rod actuator when your mechanism requires equal push and pull forces (1402 N each way at 0.5 MPa) alongside dual-side guidance. If your application needs less force, stepping down to the 50 mm bore yields 825 N both ways; if you need more, the 80 mm bore provides 2268 N. The SAID series utilizes a specific mounting subset—Basic, FA, LB, TC, FTC, TCM1, and TCM2—omitting the FB, CA, CB, and CR brackets found on single-rod variants. To replace an existing ISO 15552 cylinder, verify your 140 mm stroke, PT port threads, and mounting accessory requirements.
Remember that a standard SAID63X140 does not hold its position if air pressure is lost; the piston will drift without live pressure. The adjustable air cushions at both ends only decelerate the piston near stroke end and do not function as a locking brake. For load-holding safety, consider an external pilot-operated check valve or the related BSAID clamp-lock series.
AirtacDistr lists every SAID63 order code with its price on one page at https://airtacdistr.com/products/airtac-said63-double-rod-iso-cylinder
Quick checklist
Because it is a double-rod cylinder, the effective piston area is identical in both directions. It delivers 1402 N of force at 0.5 MPa, 1962 N at 0.7 MPa, and 2523 N at 0.9 MPa for both extend and retract strokes.
Yes, the SAID63X140 is dimensionally interchangeable per ISO 15552. You can use it as a direct replacement for other ISO 15552 profile cylinders, provided you account for the rear rod protrusion clearance and use the SAID mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2).
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.