
The AirTAC SAID63 Double Rod Cylinder SAID63AX145S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 145mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID63X145-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 63mm bore and 145mm stroke. Because a rod exits both ends, the annulus area is identical on both sides, yielding equal push and pull forces of 1402 N at 0.5 MPa. This through-rod design provides superior anti-rotation guidance and allows mounting a secondary tool, cam, or position flag on the rear rod end.
This specific configuration includes a SUS420J2 stainless steel rod (material code A) for enhanced corrosion resistance and PT tapered port threads. It is equipped with a magnet (-S) for use with AirTAC CMSE reed and DMSE electronic solid-state sensors, which seat neatly into the extruded aluminum barrel grooves on both sides. As a 145mm stroke is non-standard, it is provided as a made-to-order variant.
| Model | Airtac SAID63 Double Rod Cylinder SAID63AX145S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 145 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×145 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Ideal for transferring parts across a machine bed where the load must be pushed and pulled with identical 1402 N force and speed, preventing cycle asymmetry.
The twin-rod design prevents the piston from twisting under offset loads, providing stable linear guidance for precision sliding mechanisms without external guides.
Mount a cam or sensor flag on the protruding rear rod end to trigger DMSE electronic switches, keeping the primary work area clear of sensor wiring.
Select this 63mm bore when an application demands 1402 N of symmetrical force at 0.5 MPa, stepping up from the 50mm bore (825 N) for heavier twin-station loads, or down from the 80mm bore (2268 N) to save space. Choose the double-rod SAID over a single-rod SAI when you need dual-side guidance to prevent the load from twisting, or require rear-rod sensing. Since the 145mm stroke is a non-standard made-to-order length, verify overall dimensions and rear-rod clearance in your layout.
This cylinder uses PT tapered ports and a SUS420J2 rod. Mounting accessories are limited to the SAID set: Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting SAI's FB, CA, CB, and CR). Note that the adjustable air cushions only decelerate the piston near stroke end; they do not hold a load. If position holding without air pressure is required, use an external rod lock or pilot-operated check valve. It is dimensionally interchangeable per ISO 15552.
AirtacDistr lists every SAID63 order code with its price on one page at https://airtacdistr.com/products/airtac-said63-double-rod-iso-cylinder
Quick checklist
Because it is a double-rod cylinder, the push and pull forces are equal. It delivers 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and 2523 N at 0.9 MPa in both directions.
Yes, the SAID63X145-S is dimensionally interchangeable with other ISO 15552 double-rod profile cylinders. It uses the standard ISO mounting interface and PT ports, making it a direct replacement.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.