verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAID63 Double Rod Cylinder SAID63AX150

The AirTAC SAID63 Double Rod Cylinder SAID63AX150 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 150mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ63 mm
  • Stroke150 mm
  • Port sizeG3/8
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 36 mm
$143.73 $151.23Save 4% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SAID63 stroke, mounting and version on one page All SAID63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SAID63 Double Rod Cylinder SAID63AX150

The AirTAC SAID63X150 is a double-acting, double-rod ISO 15552 profile cylinder engineered to deliver 1402 N of output force in both extend and retract directions at 0.5 MPa. Because the piston rod exits both end covers, the annulus area is identical on both sides, ensuring perfectly balanced thrust and travel speeds. The unit features a SUS420J2 stainless steel rod for enhanced corrosion resistance and uses PT tapered port threads.

This design allows operators to mount the primary workpiece on one end while utilizing the rear rod end for dual-side guidance, anti-rotation control, or driving a secondary mechanism. The extruded aluminum barrel includes sensor grooves on both sides, and the cylinder incorporates adjustable air cushions at both ends to smoothly decelerate the piston near stroke limits.

Airtac SAID63 Double Rod Cylinder SAID63AX150 Technical Specifications

ModelAirtac SAID63 Double Rod Cylinder SAID63AX150
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ63 mm
Stroke150 mm
Acting typeDouble acting
Port sizeG3/8
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1402 N1402 N
0.7 MPa1962 N—
Max (@1.0 MPa)286 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAID63 Double Rod Cylinder SAID63AX150

SAIISO 15552 profile-barrel cylinder series.
63Bore size in mm.
×150Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAID63 Double Rod Cylinder SAID63AX150 Is Used

sync_alt

Symmetric Force Transfer

Ideal for pushing and pulling loads that require identical force and speed in both directions, preventing uneven wear on transfer mechanisms.

straighten

Anti-Rotation Slides

The twin-rod design keeps the load perfectly guided and prevents rotational twisting without needing external guide rails.

settings_input_component

Rear-Cam Actuation

Mount the main tool on the front rod while using the rear rod protrusion to drive a secondary mechanism or trigger limit sensors.

Is the Airtac SAID63 Double Rod Cylinder SAID63AX150 the Right Cylinder?

Choose this 63mm bore double-rod actuator over a single-rod SAI when your application demands equal push and pull forces, or requires a rear rod for cam actuation and position sensing. If your setup needs less force, the 50mm bore offers 825 N at 0.5 MPa; if you need more thrust, stepping up to the 80mm bore provides 2268 N each way. Remember that a plain SAID cylinder does not hold its load when air pressure is lost or exhausted; for position holding, consider the SAIL or BSAID series, or use an external rod lock.

This model is dimensionally interchangeable with other ISO 15552 cylinders, making it a direct replacement for standard profiles. It supports a reduced set of mounting accessories (Basic, FA, LB, TC, FTC, TCM1, TCM2) and omits single-rod variants like FB, CA, CB, and CR. The operating speed range is 30-800 mm/s.

AirtacDistr lists every SAID63 order code with its price on one page at https://airtacdistr.com/products/airtac-said63-double-rod-iso-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAID63 Double Rod Cylinder SAID63AX150 FAQ

Because it is a double-rod cylinder, the effective piston area is the same on both sides. It provides an equal push and pull force of 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and 2523 N at 0.9 MPa.

Yes, the SAID63X150 is dimensionally interchangeable per ISO 15552 standards. It serves as a direct replacement for other ISO 15552 double-rod profile cylinders, utilizing PT tapered ports and standard mounting interfaces.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAID63 Double Rod Cylinder SAID63AX150

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SAID63AX150 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.