verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAID63 Double Rod Cylinder SAID63AX155S

The AirTAC SAID63 Double Rod Cylinder SAID63AX155S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 155mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ63 mm
  • Stroke155 mm
  • Port sizeG3/8
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 36 mm
$153.76 $161.26Save 4% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SAID63 stroke, mounting and version on one page All SAID63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SAID63 Double Rod Cylinder SAID63AX155S

The AirTAC SAID63X155-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 63mm bore and 155mm stroke. Because the piston rod exits both end covers, the annulus area is identical on extend and retract, yielding exactly 1402 N of force in both directions at 0.5 MPa. This symmetric output is ideal for mechanisms requiring consistent push and pull dynamics.

Equipped with a -S magnet, this unit supports AirTAC CMSE reed and DMSE electronic solid-state sensors housed within the dual-side barrel grooves. The rod is constructed from SUS420J2 stainless steel (option A) for enhanced corrosion resistance, and fluid connections use PT tapered ports. The rear rod extension can drive a secondary mechanism or mount a position flag, though total overall length requires extra rear clearance.

Airtac SAID63 Double Rod Cylinder SAID63AX155S Technical Specifications

ModelAirtac SAID63 Double Rod Cylinder SAID63AX155S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ63 mm
Stroke155 mm
Acting typeDouble acting
Port sizeG3/8
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1402 N1402 N
0.7 MPa1962 N—
Max (@1.0 MPa)286 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAID63 Double Rod Cylinder SAID63AX155S

SAIISO 15552 profile-barrel cylinder series.
63Bore size in mm.
×155Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAID63 Double Rod Cylinder SAID63AX155S Is Used

sync_alt

Symmetric Force Transfer

Drives dual-station actuators where the 1402 N extend and retract forces must be perfectly matched to prevent mechanical binding in linked mechanisms.

straighten

Anti-Rotation Slides

Utilizes the twin-rod architecture to guide vertical lifting slides, preventing piston rotation and maintaining precise tool alignment without external guides.

settings_input_component

Through-Rod Sensing

Mounts the primary workpiece on the front rod and a rear position flag on the trailing rod to trigger DMSE solid-state sensors in confined spaces.

Is the Airtac SAID63 Double Rod Cylinder SAID63AX155S the Right Cylinder?

Select this 63mm bore when an application demands equal 1402 N bi-directional force and superior anti-rotation guidance that a single-rod SAI cannot provide. If your push-pull cycle requires less energy, step down to the 50mm bore (825 N each way); for heavier symmetric loads, step up to the 80mm bore (2268 N). As a true ISO 15552 profile cylinder, it serves as a direct replacement for other standard double-rod units with matching G3/8 ports and PT thread type.

Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2 (note that FB, CA, CB, and CR are single-rod SAI only). The adjustable air cushions at both ends decelerate the piston near stroke limits but do not lock or hold the load; if position holding without live air pressure is required, use an external pilot-operated check valve or explore the BSAID clamp-lock series. Since the stroke is 155mm, side-load stress on the rod bearing is moderate, but external guidance is recommended for heavy off-center loads.

AirtacDistr lists every SAID63 order code with its price on one page at https://airtacdistr.com/products/airtac-said63-double-rod-iso-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAID63 Double Rod Cylinder SAID63AX155S FAQ

Because it is a double-rod cylinder, the effective piston area is the same in both directions. It delivers 1402 N of force at 0.5 MPa, 1962 N at 0.7 MPa, and 2523 N at 0.9 MPa on both extend and retract strokes.

It is dimensionally interchangeable per ISO 15552, sharing standard mounting footprints. However, the adjustable air cushions only decelerate the piston; they do not hold the load if air pressure is lost, so an external rod lock is needed for position holding.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAID63 Double Rod Cylinder SAID63AX155S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SAID63AX155S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.