verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAID63 Double Rod Cylinder SAID63AX165

The AirTAC SAID63 Double Rod Cylinder SAID63AX165 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 165mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ63 mm
  • Stroke165 mm
  • Port sizeG3/8
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 36 mm
$149.11 $156.61Save 4% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SAID63 stroke, mounting and version on one page All SAID63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SAID63 Double Rod Cylinder SAID63AX165

The AirTAC SAID63X165 is a double-acting, double-rod ISO 15552 profile cylinder engineered for applications requiring symmetric dynamics. Because a piston rod extends from both end covers, the annulus area is identical on both sides, yielding an equal extend and retract force of 1402 N at 0.5 MPa. This through-rod architecture provides superior anti-rotation guidance compared to a single-rod SAI.

This specific configuration features SUS420J2 stainless steel rods (material code A) for enhanced durability against environmental exposure, alongside PT tapered port threads. The extruded aluminum barrel includes dual sensor grooves for straightforward mounting of position switches. Note that a plain SAID relies on adjustable air cushions for end-of-stroke deceleration and does not hold position if air pressure is lost.

Airtac SAID63 Double Rod Cylinder SAID63AX165 Technical Specifications

ModelAirtac SAID63 Double Rod Cylinder SAID63AX165
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ63 mm
Stroke165 mm
Acting typeDouble acting
Port sizeG3/8
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1402 N1402 N
0.7 MPa1962 N—
Max (@1.0 MPa)286 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAID63 Double Rod Cylinder SAID63AX165

SAIISO 15552 profile-barrel cylinder series.
63Bore size in mm.
×165Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAID63 Double Rod Cylinder SAID63AX165 Is Used

sync_alt

Symmetric Force Transfer

Drives loads requiring identical push and pull dynamics, utilizing the 1402 N both-way output to ensure consistent cycle timing without force differential compensation.

straighten

Anti-Rotation Slides

Leverages the twin-rod design to prevent mechanical rotation during linear movement, guiding precision tooling or workpieces with high lateral stability.

settings_input_component

Rear-Rod Cam Actuation

Mounts a secondary cam or position flag on the protruding rear rod end to trigger external limit switches or drive an auxiliary mechanism synchronously.

Is the Airtac SAID63 Double Rod Cylinder SAID63AX165 the Right Cylinder?

Select the SAID63X165 when your mechanism requires equal push and pull forces (1402 N each way at 0.5 MPa) or needs a rear rod end to mount a secondary cam, limit flag, or second tool. If your application demands higher thrust, stepping up to the 80 mm bore provides 2268 N both ways at 0.5 MPa. Conversely, a 50 mm bore reduces the footprint to 825 N. For applications requiring true position holding without live air pressure, consider the SAIL (pneumatic lock) or BSAID (clamp-lock) alternatives.

This cylinder is dimensionally interchangeable per ISO 15552 and utilizes a reduced mounting accessory set (Basic, FA, LB, TC, FTC, TCM1, TCM2), omitting the FB, CA, CB, and CR variants found on single-rod models. Ensure you specify PT port threads and the SUS420J2 rod material when submitting your RFQ.

AirtacDistr lists every SAID63 order code with its price on one page at https://airtacdistr.com/products/airtac-said63-double-rod-iso-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAID63 Double Rod Cylinder SAID63AX165 FAQ

Because the double-rod design subtracts the rod area from both sides of the piston, the extend and retract forces are equal. The SAID63X165 provides 1402 N of force both ways at 0.5 MPa, and 1962 N both ways at 0.7 MPa.

Yes, the SAID63X165 is dimensionally interchangeable with other ISO 15552 double-rod profile cylinders. It uses the standard ISO 15552 mounting interface and accepts Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounting accessories.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAID63 Double Rod Cylinder SAID63AX165

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SAID63AX165 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.