
The AirTAC SAID63 Double Rod Cylinder SAID63AX185S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 185mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID63X185-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 63mm bore and 185mm stroke. Because a rod extends from both end covers, the annulus area is identical on both sides, yielding exactly 1402 N of force in both extend and retract directions at 0.5 MPa. This symmetric output is ideal for mechanisms requiring equal push and pull dynamics.
Equipped with a magnet for position sensing, this unit supports AirTAC CMSE reed and DMSE solid-state switches housed in the dual-side sensor grooves. The rods are forged from SUS420J2 stainless steel (material code A) for superior corrosion resistance, and fluid connections use PT tapered threads. As a non-standard 185mm stroke, it is manufactured to exact order specifications.
| Model | Airtac SAID63 Double Rod Cylinder SAID63AX185S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 185 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×185 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives automated assemblies where equal push and pull forces of 1402 N are required to maintain balanced tension on both stroke ends.
Uses the twin SUS420J2 rods exiting both covers to guide heavy vertical loads and prevent mechanical twisting without external guides.
Mounts the primary workpiece on the front rod while utilizing the rear protrusion to trigger a DMSE solid-state sensor or secondary mechanism.
Select this specific 63mm bore when an application demands 1402 N of symmetric force at 0.5 MPa, stepping up from the 50mm bore which provides 825 N, or stepping down from the 80mm bore which yields 2268 N. The double-rod architecture is chosen over a single-rod SAI when the mechanism requires dual-side guidance, anti-rotation stability, or a rear-rod extension to mount a secondary cam or position flag.
Mounting options are strictly limited to Basic, FA, LB, TC, FTC, TCM1, and TCM2 brackets, omitting the FB, CA, CB, and CR variants found on single-rod counterparts. Note that a plain SAID cylinder cannot hold a load or maintain its position if air pressure is lost; the adjustable air cushions only decelerate the piston near stroke ends. For positive holding, consider an external rod lock or the BSAID clamp-lock series. Ensure you specify PT port threads and the -S magnet option when requesting a direct replacement for other ISO 15552 double-rod cylinders.
AirtacDistr lists every SAID63 order code with its price on one page at https://airtacdistr.com/products/airtac-said63-double-rod-iso-cylinder
Quick checklist
Because the double-rod design subtracts the rod area from both sides of the piston, the force is equal in both directions. It provides 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and 2523 N at 0.9 MPa.
Yes, the SAID63X185-S is dimensionally interchangeable per ISO 15552 profile standards. When ordering, specify the PT tapered port threads, the -S magnet for CMSE/DMSE sensors, and the appropriate mounting bracket from the SAID set (Basic, FA, LB, TC, FTC, TCM1, TCM2).
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.