
The AirTAC SAID63 Double Rod Cylinder SAID63AX190S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 190mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID63X190-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 63mm bore and 190mm stroke. Because a rod exits both ends, the annulus area is identical on each side, yielding equal push and pull forces of 1402 N at 0.5 MPa. It includes a magnet for position sensing.
This variant uses a SUS420J2 stainless steel rod for enhanced corrosion resistance and features extruded aluminum dual sensor grooves. The rear rod end can drive a secondary mechanism or cam, while the twin rods provide superior anti-rotation guidance compared to single-rod SAI types.
| Model | Airtac SAID63 Double Rod Cylinder SAID63AX190S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 190 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×190 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Ideal for pressing or transferring loads where the 1402 N output must remain identical in both extend and retract directions without recalculating pressure.
Mount a primary workpiece on the front rod and a secondary cam or tool on the rear rod to drive two synchronized mechanisms from one cylinder.
The dual through-rods prevent piston rotation, providing stable guidance for lifting or sliding heavy fixtures that would twist on a single rod.
Choose this 63mm bore cylinder when symmetric actuation is required, stepping up from the 50mm bore (825 N at 0.5 MPa) or down from the 80mm bore (2268 N at 0.5 MPa). The double-rod design is selected over a single-rod SAI when an application needs twin-station actuation, rear-side position flagging, or strict anti-rotation guidance.
It uses a PT tapered G3/8 port and the reduced SAID mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2), omitting FB, CA, CB, and CR. Note that a plain SAID does not hold a load if air pressure is lost; use a SAIL or BSAID lock variant if position holding is required. The -S magnet works with AirTAC CMSE (reed) and DMSE (solid-state) switches.
AirtacDistr lists every SAID63 order code with its price on one page at https://airtacdistr.com/products/airtac-said63-double-rod-iso-cylinder
Quick checklist
Because the double-rod design has the same effective piston area on both sides, it provides equal force in both directions: 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and 2523 N at 0.9 MPa.
Yes, it is dimensionally interchangeable per ISO 15552. It uses the standard profile mounting interface, but note the SAID set omits FB, CA, CB, and CR brackets, and requires rear-rod clearance.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.