
The AirTAC SAID63 Double Rod Cylinder SAID63AX200 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 200mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID63X200 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 63mm bore and 200mm stroke. Because the piston rod exits both end covers, the annulus area is identical on both sides, yielding exactly 1402N of output force at 0.5 MPa in both extend and retract directions. The G3/8 PT ports supply air evenly for balanced motion.
This configuration uses a SUS420J2 stainless steel rod (material code A) for enhanced corrosion resistance. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE reed or DMSE electronic switches, though this specific unit ships without a magnet. The rear rod extension is perfect for driving a secondary mechanism or mounting a position flag.
| Model | Airtac SAID63 Double Rod Cylinder SAID63AX200 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drive two separate workstations simultaneously from one cylinder, utilizing the equal 1402N force on both the front and rear rod ends for synchronized assembly tasks.
The dual-rod design provides superior resistance to torsional deflection, keeping guided loads perfectly straight without needing external linear bearings.
Mount a cam or target flag on the protruding rear rod to trigger external sensors, allowing precise position verification from the opposite side of the machine.
Select this 63mm bore when an application requires equal push and pull forces, specifically 1402N at 0.5 MPa. If your load demands less force, step down to the 50mm bore (825N); if you need more, step up to the 80mm bore (2268N). Choose the SAID double-rod over a single-rod SAI when you need dual-side guidance, anti-rotation stability, or rear-rod cam actuation.
As a dimensionally interchangeable ISO 15552 cylinder, it serves as a direct replacement using standard mounting accessories (Basic, FA, LB, TC, FTC, TCM1, TCM2). Note that SAID omits the FB, CA, CB, and CR mounts found on single-rod variants. Because this is a 200mm stroke, it is under the 300mm threshold, but always ensure adequate rear-rod clearance. A plain SAID does not hold position unpowered; for dead-air load holding, consider an external pilot-operated check valve or the BSAID clamp-lock series.
AirtacDistr lists every SAID63 order code with its price on one page at https://airtacdistr.com/products/airtac-said63-double-rod-iso-cylinder
Quick checklist
The SAID63X200 provides equal force in both directions due to its double-rod design. It delivers 1402N at 0.5 MPa, 1962N at 0.7 MPa, and 2523N at 0.9 MPa for both extend and retract strokes.
Yes, the SAID63X200 is dimensionally interchangeable per ISO 15552 standards. It shares the exact mounting footprint of other ISO 15552 profile cylinders and supports standard mounts like FA, LB, and TC.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.