
The AirTAC SAID63 Double Rod Cylinder SAID63AX200S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 200mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID63X200-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 63mm bore and 200mm stroke. Because a stainless steel SUS420J2 rod exits both ends, the annulus area is identical on extend and retract, yielding equal force and speed in both directions. This configuration delivers 1402N of thrust and pull at 0.5 MPa, scaling to 2523N at 0.9 MPa.
The twin-rod design allows you to mount a primary workpiece on one end and a cam, position flag, or secondary mechanism on the rear rod. Equipped with a magnet (-S), the extruded aluminum barrel features sensor grooves on both sides for direct mounting of CMSE reed or DMSE solid-state switches.
| Model | Airtac SAID63 Double Rod Cylinder SAID63AX200S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives push and pull mechanisms requiring identical 1402N force at 0.5 MPa in both directions without speed variation.
Uses the twin-rod guidance to prevent mechanical twisting and maintain precise alignment during machining operations.
Mounts the primary tool on the front rod and a DMSE sensor flag on the rear rod for isolated, non-interfering detection.
Choose this 63mm bore double-rod cylinder when an application demands anti-rotation guidance, dual-side actuation, or rear-rod position sensing that a single-rod SAI cannot provide. If your thrust requirements are lower, the 50mm bore offers 825N both ways at 0.5 MPa; stepping up to the 80mm bore yields 2268N. This model uses PT tapered ports sized at G3/8 and accepts the SAID mounting accessory set: Basic, FA, LB, TC, FTC, TCM1, and TCM2.
For strokes of 300mm or longer, the unsupported rod mass increases side-load risks; integrate an external guide to prevent rod-bearing bending. Note that the adjustable air cushions at both ends only decelerate the piston near stroke end and do not hold a load. If position holding without air pressure is required, select a SAIL, BSAID, or an external pilot-operated check valve. This unit is dimensionally interchangeable per ISO 15552.
AirtacDistr lists every SAID63 order code with its price on one page at https://airtacdistr.com/products/airtac-said63-double-rod-iso-cylinder
Quick checklist
Because the double-rod design subtracts the rod area from both sides of the piston, the extend and retract forces are equal. It outputs 1402N at 0.5 MPa, 1962N at 0.7 MPa, and 2523N at 0.9 MPa in both directions.
Yes, the SAID63X200-S is dimensionally interchangeable per ISO 15552. It serves as a direct replacement for other ISO 15552 double-rod cylinders, utilizing the same mounting interface dimensions and G3/8 ports.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.