
The AirTAC SAID63 Double Rod Cylinder SAID63AX210 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 210mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID63X210 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 63mm bore and a 210mm non-standard stroke. Because a piston rod exits both end covers, the annulus area is identical on both sides, yielding exactly 1402 N of output force at 0.5 MPa in both extend and retract directions.
This unit is configured with a SUS420J2 stainless steel rod (option A) for superior corrosion resistance and a PT tapered port thread. The extruded aluminum barrel includes sensor grooves on both sides, allowing you to mount position switches along either rod extension for dual-side feedback.
| Model | Airtac SAID63 Double Rod Cylinder SAID63AX210 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 210 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×210 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives push-pull mechanisms where identical 1402 N force and speed in both directions are critical for balanced, non-binding motion.
Uses both rod ends to operate two separate workstations simultaneously, ensuring perfectly synchronized strokes from one ISO 15552 cylinder.
Mounts a position flag or cam on the rear rod extension to trigger external limit switches without interfering with the primary workpiece.
Choose this double-rod configuration over a single-rod SAI when your mechanism requires equal push and pull forces, enhanced anti-rotation guidance, or a rear-rod extension to drive a secondary cam. If your application needs less force, stepping down to the 50mm bore yields 825 N both ways at 0.5 MPa. Because this is a 210mm non-standard stroke, expect made-to-order lead times and verify rear-rod clearance to avoid mechanical interference.
At 210mm of travel, the unsupported load length increases bending moments on the 20mm rod and its bearing; utilize an external guide rail for heavy or off-center loads to prevent premature wear. Note that the adjustable air cushions only decelerate the piston near stroke ends; a plain SAID63X210 will drift if air pressure is lost. For position holding, consider a SAIL lock or BSAID clamp-lock variant. Mounting options are limited to Basic, FA, LB, TC, FTC, TCM1, and TCM2.
AirtacDistr lists every SAID63 order code with its price on one page at https://airtacdistr.com/products/airtac-said63-double-rod-iso-cylinder
Quick checklist
Because the double-rod design subtracts the rod area from both sides of the piston, the force is equal in both directions. It provides 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and 2523 N at 0.9 MPa.
Yes. The SAID63X210 is dimensionally interchangeable per ISO 15552 mounting dimensions. It uses a profile barrel design and supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts, making it a direct replacement for other ISO 15552 double-rod cylinders.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.