
The AirTAC SAID63 Double Rod Cylinder SAID63AX210S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 210mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID63X210-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 63mm bore and a 210mm stroke. Because a piston rod exits both end covers, the effective annulus area is identical on the extend and retract sides. This cylinder generates an equal 1402 N of force in both directions at 0.5 MPa, ensuring perfectly symmetric motion and speed. The 210mm stroke is a non-standard, made-to-order length that requires appropriate rear-rod clearance.
This variant includes a -S magnet for position sensing and uses a SUS420J2 stainless steel rod (material code A) for enhanced corrosion resistance. The extruded aluminum barrel features sensor grooves on both sides, allowing you to mount AirTAC CMSE reed or DMSE solid-state switches along either end of the stroke. You can attach the primary workpiece to the front rod end while using the rear rod protrusion to drive a secondary mechanism, mount a position flag, or provide dual-side guidance.
| Model | Airtac SAID63 Double Rod Cylinder SAID63AX210S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 210 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×210 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Ideal for moving loads where equal push and pull forces are critical, ensuring consistent cycle times in both directions without speed variations.
The twin-rod configuration prevents the piston from twisting under offset loads, providing precise linear guidance for sliding mechanisms.
The protruding rear rod offers a dedicated mounting point for CMSE/DMSE sensor flags or cam mechanisms to trigger secondary operations.
Choose this 63mm bore when you need more thrust than the 50mm version (825 N at 0.5 MPa) but want to avoid the larger footprint and higher air consumption of the 80mm class (2268 N at 0.5 MPa). A double-rod design is selected over a single-rod SAI when the application demands anti-rotation stability, symmetric force, or a rear-rod cam for dual-station actuation. Keep in mind that a plain SAID does not hold its load if air pressure drops or the valve is centered; for fail-safe holding, consider an external rod lock or the BSAID clamp-lock variant.
This cylinder uses a PT tapered port thread (G3/8) and is dimensionally interchangeable with other ISO 15552 double-rod cylinders. It supports the reduced SAID mounting accessory set: Basic, FA, LB, TC, FTC, TCM1, and TCM2. Because the 210mm stroke exceeds the 63mm bore's 150mm standard maximum, it is a made-to-order item. Furthermore, at this stroke length, the 20mm rod and M16x1.5 thread experience increased bending moments under side loads; for optimal bearing life, use an external guide rail to support the payload.
AirtacDistr lists every SAID63 order code with its price on one page at https://airtacdistr.com/products/airtac-said63-double-rod-iso-cylinder
Quick checklist
Because the double-rod design occupies area on both sides of the piston, the extend and retract forces are equal. It outputs 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and 2523 N at 0.9 MPa in both directions.
Yes, it is dimensionally interchangeable per ISO 15552. However, SAID uses a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and omits FB, CA, CB, and CR brackets which are specific to single-rod SAI cylinders.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.