verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAID63 Double Rod Cylinder SAID63AX230

The AirTAC SAID63 Double Rod Cylinder SAID63AX230 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 230mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ63 mm
  • Stroke230 mm
  • Port sizeG3/8
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 36 mm
$164.67 $172.17Save 4% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SAID63 stroke, mounting and version on one page All SAID63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SAID63 Double Rod Cylinder SAID63AX230

The AirTAC SAID63X230 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 63 mm bore and a 230 mm stroke. Because the piston rod extends through both end covers, the annulus area is identical on both sides, yielding equal extend and retract forces of 1402 N at 0.5 MPa. This through-rod design provides superior anti-rotation guidance and allows driving a secondary mechanism from the rear.

This specific configuration uses a SUS420J2 stainless steel rod for enhanced durability against moisture, alongside PT tapered port threads. It shares the standard extruded aluminum barrel with dual sensor grooves, though position detection requires adding a magnet separately. Note that the 230 mm stroke is a non-standard made-to-order length, meaning the overall physical envelope is longer than standard SAI variants to accommodate the rear rod protrusion.

Airtac SAID63 Double Rod Cylinder SAID63AX230 Technical Specifications

ModelAirtac SAID63 Double Rod Cylinder SAID63AX230
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ63 mm
Stroke230 mm
Acting typeDouble acting
Port sizeG3/8
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1402 N1402 N
0.7 MPa1962 N—
Max (@1.0 MPa)286 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAID63 Double Rod Cylinder SAID63AX230

SAIISO 15552 profile-barrel cylinder series.
63Bore size in mm.
×230Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAID63 Double Rod Cylinder SAID63AX230 Is Used

sync_alt

Symmetric Force Transfer

Drives opposing mechanisms with identical 1402 N push and pull forces, ensuring perfectly balanced motion without pressure compensation valves.

precision_manufacturing

Anti-Rotation Slides

The twin-rod architecture prevents piston rotation during high-speed linear actuation, ideal for precision tooling and guided clamping tasks.

settings_input_component

Rear-Rod Cam Actuation

Utilize the protruding rear rod end to trigger external limit switches or drive a secondary synchronized mechanism independently.

Is the Airtac SAID63 Double Rod Cylinder SAID63AX230 the Right Cylinder?

Choose this double-rod SAID63X230 over a single-rod SAI when your mechanism requires symmetric force, resistance to torsional load, or a rear-rod extension for a cam or limit flag. If your application needs less force, stepping down to the 50 mm bore yields 825 N both ways at 0.5 MPa. If higher thrust is required, the 80 mm bore provides 2268 N. As a true ISO 15552 cylinder, it offers a direct replacement footprint for other standard profile cylinders.

When selecting accessories, confirm the PT port thread and choose from the reduced SAID mounting set: Basic, FA, LB, TC, FTC, TCM1, or TCM2 (omitting FB, CA, CB, and CR). Because the 230 mm stroke exceeds the 1500 mm standard limit, it is a made-to-order non-standard stroke. For strokes of 300 mm or more, ensure an external guide supports side loads to prevent rod-bearing bending. Finally, a plain SAID does not hold its position if air pressure is lost; use a SAIL or BSAID variant if fail-safe load holding is required.

AirtacDistr lists every SAID63 order code with its price on one page at https://airtacdistr.com/products/airtac-said63-double-rod-iso-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAID63 Double Rod Cylinder SAID63AX230 FAQ

Because the double-rod design occupies area on both sides of the piston, the effective annulus area is equal in both directions. It delivers 1402 N of force both extending and retracting at 0.5 MPa, and 1962 N both ways at 0.7 MPa.

It is dimensionally interchangeable with ISO 15552 profile cylinders, but the double-rod design uses a reduced mounting set: Basic, FA, LB, TC, FTC, TCM1, and TCM2. It omits the FB, CA, CB, and CR mounts found on single-rod variants.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAID63 Double Rod Cylinder SAID63AX230

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SAID63AX230 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.