
The AirTAC SAID63 Double Rod Cylinder SAID63AX25 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 25mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID63X25 is a double-acting, double-rod ISO 15552 profile cylinder engineered for symmetrical actuation. Because the piston rod exits both end covers, the annulus area is identical on both sides, yielding an equal extend and retract force of 1402 N at 0.5 MPa. This through-rod design provides superior anti-rotation stability and allows a rear-mounted position flag to trigger sensors.
This specific configuration features a SUS420J2 stainless steel rod for enhanced corrosion resistance and utilizes PT tapered port threads. The extruded aluminum barrel includes sensor grooves on both sides, and adjustable air cushions at both ends absorb impact energy over the short 25 mm stroke.
| Model | Airtac SAID63 Double Rod Cylinder SAID63AX25 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 25 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a workpiece from one rod end while the opposing rear rod end simultaneously moves a secondary mechanism, maintaining perfectly matched velocity and 1402 N force in both directions.
The dual-rod geometry prevents piston rotation within the barrel, providing precise linear guidance for short-stroke 25 mm clamping and positioning tasks without external guides.
Mounts a cam or limit flag on the rear rod end to actuate external switches, keeping the primary 63 mm tooling side completely free of sensor obstructions.
Choose this 63 mm bore when an application requires balanced 1402 N force in both directions, stepping up from a 50 mm bore (825 N) or down from an 80 mm bore (2268 N). The twin-rod architecture is selected over a single-rod SAI when the mechanism needs dual-side guidance, a rear cam, or strictly equal push/pull speeds. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
As a standard double-acting cylinder, the SAID63X25 does not hold its position if air pressure is lost; use a SAIL lock cylinder or external pilot-operated check valve for load-holding. It is dimensionally interchangeable per ISO 15552 and requires rear-rod clearance for the protruding rod end.
AirtacDistr lists every SAID63 order code with its price on one page at https://airtacdistr.com/products/airtac-said63-double-rod-iso-cylinder
Quick checklist
Because it is a double-rod cylinder, the effective piston area is identical on both sides. It provides an equal force of 1402 N in both the extend and retract directions at 0.5 MPa (1962 N at 0.7 MPa).
Yes, the SAID63X25 is dimensionally interchangeable with other ISO 15552 profile cylinders. It shares the standard 63 mm mounting footprint and uses PT tapered ports, allowing it to drop into existing setups.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.